PRODUCT DATA SHEET SILICONE LUBRICANT KEY FEATURES AND BENEFITS • Broad temperature range –40°C (–40°F) to 205°C (400°F) • NSF H1 Registered • Complies with sections 178.3570, 181.28 and 178.3910 of FDA food additives regulations • Makes surfaces water-resistant • Non-staining, fire-resistant, non-toxic • Penetrates fine tolerances APPLICATION AREAS • Gears, Rollers and Cams • Hinges • Slides • Conveyors DESCRIPTION Chesterton 660 Silicone Lubricant is a clean, clear, silicone fluid which will provide continuous film lubrication for mechanical parts and sliding surfaces constructed of plastic, rubber or metal. Wherever porous synthetics, plastics, rubber, neoprene, wood etc. come into contact with other materials, 660 Silicone Lubricant quickly penetrates surfaces to lubricate, prevent sticking and reduce wear. The product leaves a slippery, clean film which will not stain or leave gummy residues. It will stay where it is applied and not readily be squeezed out. Chesterton 660 Silicone Lubricant is quite versatile for both high and low temperature applications. The product is effective from -40°C to 205°C (-40°F to 400°F). It is invaluable as a lubricant where petroleum oils cannot be used. • High-speed Injection Molding • Medical and Pharmaceutical Equipment • Rubber Gasketing • Sliding Doors Apply by spraying or using squirt oiler or oil can with extended spout. Aplly evenly and reapply as needed. Chesterton 660 Silicone Lubricant is not designed for Lubri-Cup™ automatic dispensing equipment. TYPICAL PHYSICAL PROPERTIES Operating Temperature Before using this product, please refer to Safety Data Sheet (SDS). 860 Salem Street, Groveland, MA 01834 USA 978-469-6888 www.chesterton.com © 2018 A.W. Chesterton Company ® Registered trademark owned by A.W. Chesterton Company in USA and other countries, unless otherwise noted. Technical Data reflects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR