Catalog excerpts
PRODUCT DATA SHEET KEY FEATURES AND BENEFITS • Synthetic lubricant base • Biodegradable • Superior heat dissipation • Excellent lubricity • Internal resistance to microbial attack MACHINERY COOLANT APPLICATION AREAS • Tapping • Boring DESCRIPTION Chesterton® 380 Machinery Coolant is a high-performance, low maintenance, synthetic metal working fluid. It provides superior lubricity and cooling for a variety of machining operations. It is recommended for alloy steels, cast irons and exotic metals. Machinery Coolant will provide protection against bacterial growth and is very tolerant to hard water. It is usable for a broad range of machining operations ranging from slow speed applications to high speed turning. It is ideal for high precision, high quality and custom machining operations. The excellent lubricity and coolant properties of 380 reduce heat in the chip formation process, which extends tool life when compared to conventional soluble oils and semi-synthetics. • Grinding • Milling Before adding 380 to any reservoir, remove old coolant, chips and other resideual matter from the system. Thoroughly rinse the reservoir with water until the pH is within .1 of make up water. Mix the concentrated 380 into water. Do not add water to the concentrate. Pour the diluted coolant into a clean reservoir. Do not mix 380 with any other coolant. Diluations in excess of 4% are not recommended since the corrosion protection provided by 380 and it's internal resistance to bacterial attack will be reduced. Coolant Maintenance: 380 is designed for minimum maintenance. For maximum life, its is recommended that the concetration be checked regularly using a refractometer to insure that the mix ration is correct. Tank side additives are availabel to control foam and bacterial contamination. • Threading • Machining • Sawing • Turning TYPICAL PHYSICAL PROPERTIES Flash Point (ASTM D 93) Specific Gravity Clear, Colorless Liquid Boiling Point Hard Water Stability Fire Point (ASTM D 92) Freezing Point Freeze Thaw Stability Before using this product, please refer to Safety Data Sheet (SDS).
Open the catalog to page 1Concentration Check MACHINERY COOLANT PERCENT CONCENTRATION Recommended Starting Dilutions Stainless Steel High Alloy Steel Carbon Steel Cast Iron Suggested Uses Operations Metals* Broaching Alloy 20 Drilling Aluminum Grinding Brass Machining Bronze Milling Carbon Steel Reaming Cast Iron Sawing Copper Tapping Hastelloy† Turning High Alloy Steel Stainless Steel Titanium *Not recommended for use with magnesium †Haynes International, Inc. Registered Trademark 860 Salem Street, Groveland, MA 01834 USA 978-469-6888 www.chesterton.com © 2018 A.W. Chesterton Company ® Registered trademark owned by...
Open the catalog to page 2All A.W. Chesterton Company catalogs and technical brochures
-
MECHANICAL SEAL
134 Pages
-
Catalogue 2020
96 Pages
-
SpeedSeal
8 Pages
-
Polymer Seals
148 Pages
-
Valve sealing program
8 Pages
-
715 spraflex gold
1 Pages
-
635 SXC
2 Pages
-
740 heavy duty rust guard
1 Pages
-
783 ACR
2 Pages
-
DualPac 2212
2 Pages
-
ARC CATALOG OF PRODUCTS
40 Pages
-
296 electro contact cleaner
1 Pages
-
1400R/1400
2 Pages
-
660 silicone lubricant
1 Pages
-
725 Nickel Anti-Seize
1 Pages
-
Catalog:CHESTERTON CORE PRODUCTS
88 Pages
-
477-1: strong ,yet pliable
2 Pages
-
Mechanical seals
172 Pages
-
Chesteton packing and gasket
64 Pages
-
Corporate brochure
13 Pages
-
Catalogue of products
96 Pages
-
Rotating CAT
40 Pages
-
Mechanical Seals Support Systems
16 Pages
-
MANWAY Sealing Solution
4 Pages
-
ARC Composite Coatings
80 Pages
-
Mechanical seal catalog
172 Pages
-
Flange Gaskets
4 Pages
-
INTELLIFLOW
2 Pages
-
ADVANCED REINFORCED COATINGS
80 Pages
Archived catalogs
-
Valve Sealing Program
8 Pages
-
WATER SAVINGS SYSTEM
2 Pages