Catalogs >
AVOLA Maschinenfabrik A. Volkenborn GmbH & Co. KG >
Gama 65 K3

Gama 65 K3
1Pages

Catalog excerpts

AVOLA Cross cut table saw GAMA 65 K 5 The AVOLA 65 K is a Cross cut table saw with a rotary disk and a tiltable saw blade. Chop cuts with angles from 90° to 30° are just as possible as the cut to be made for the double mitre (compound mitre cut). The safety concept consists of a „two-hand control“ in combination with a clear protective hood, which completely covers the sawing operation. Opening the protective hood causes the saw blade to move under the table and the slit to be automatically closed. The 650 mm saw blade runs down shielded under the table. Equipment / scope of delivery ● ● ● ● ● ● ● ● ● ● Cutting heights 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Motor 8.1 kW Pneumatic clamping cylinder, right/left Pneumatic chopping device via two-hand control Electrical saw blade inclination adjustment 90 – 30° – digital display Rotary disk 20-160° Laser chop cut display Carbide saw blade 650 mm Safety hood Rotary disk / chop cut 90° cut Diagonal cuts 90°– 30° Mitre cuts Compound mitre cuts Technical datas Motor power (S6 - 40%) Drive Motor speed Saw blade speed Cutting speed Carbide saw blade Cutting height 90/45/30° approx. Table dimensions Inclination adjustment Rotatable part of the table Ø of suction connection Underpressure at suction connection Sound power level in acc. with DIN EN ISO 3746, idle mode / machining Emission sound pressure in acc. withprEN ISO 11202 with supplement CEN TC 142Idle mode/ machining

Open the catalog to page 1