*mydirectindustry

Catalogs
AVM AUTOMATION
Pneumatic parallel grippers Type 24

Pneumatic parallel grippers Type 24

Product catalog summary

Overview: The document provides detailed specifications and descriptions of parallel grippers, specifically the Type 24 series, including both two-finger and three-finger models. It outlines the technical features, materials used, operational parameters, and available accessories.

Specifications:

Type 24 Two-Finger Gripper: Features include a double-acting pneumatic drive, constant clamping force, and a fully protected mechanism. It is suitable for both internal and external clamping and includes a magnetic piston for non-contact detection. Materials include hardened anodized aluminum for the housing and cylinder, treated steel for the fingers and guide, and PTFE for bearings. Operating pressure ranges from 2.5 to 8 bars, with a temperature range of 5 to 50°C. Lubrication is recommended after 4 million operations.
Type 24 Three-Finger Gripper: Similar features to the two-finger model, with the addition of a third concentric finger. The same materials and operational parameters apply.

Performance Data:

Clamping forces at 6 bars vary by model, with the two-finger models ranging from 60N to 2300N and the three-finger models from 60N to 900N.
Stroke per finger and weight also vary by model, with repeatability maintained at 0.02mm across all models.
Opening or closing times range from 0.05s to 0.20s, depending on the model.

Accessories: Magnetic field sensors with a magnet-inductive PNP fixed connector are available for order separately.

Assembly and Maintenance: Detailed assembly interfaces and repair kits are referenced, with specific pages indicated for further information.

Additional Products: The document also briefly mentions other pneumatic handling products offered by the company, including gantries, linear units, rotary modules, and various types of guides and tables.

Catalog excerpts

Pinces parallèles Parallel grippers Type 24 F - 68190 RAEDERSHEIM Tél: +33 (0)3.89.83.69.40 Fax: +33 (0)3.89.83.69.41 [email protected] www.avm-automation.fr

Open the catalog to page 1

PINCE PARALLELE / PARALLEL GRIPPER Type 24*2 Descriptif : - Pince a serrage parallele a 2 doigts concentriques. - Commande pneumatique double effet. - Effort de serrage constant sur toute la course. - Mecanisme entierement protege. - Prise de piece interieure ou exterieure. - Piston magnetique pour detection sans contact. - Pince alliant fiabilite, repetabilite et robustesse. - Materiaux : corps, cylindre : aluminium anodise dur doigts, guide : acier allie traite paliers : PTFE - Pression d’utilisation : 2,5 a 8 bars. - Fluide : air filtre lubrifie ou non lubrifie. - Graissage preconise apres...

Open the catalog to page 2

PINCE PARALLELE / PARALLEL GRIPPER Type 24*2

Open the catalog to page 3

PINCE PARALLELE / PARALLEL GRIPPER Type 24*2 Bras de levier / Lever arm L (mm) F (daN) 35Efforts exterieurs admissibles / Admissible external forces : Fx (daN) Fy (daN) Modele / Model Conditions : - appuis sur la piece perpendiculaire a l’axe de la pince / resting on the part perpendicular to the gripper axis. - doigts de pince immobiles / fingers of the gripper motionless - sans choc (ex: clipsage de piece avec montee en pression progressive) / without shocks (ex: part clamping with progressive pressure rising).

Open the catalog to page 4

PINCE 3 DOIGTS PARALLELE / 3 FINGERS PARALLEL GRIPPER Descriptif : - Pince a serrage parallele a 3 doigts concentriques. - Commande pneumatique double effet. - Effort de serrage constant sur toute la course. - Mecanisme entierement protege. - Prise de piece interieure ou exterieure. - Piston magnetique pour detection sans contact. - Pince alliant fiabilite, repetabilite et robustesse. - Materiaux : corps, cylindre : aluminium anodise dur doigts, guide : acier allie traite paliers : PTFE - Pression d’utilisation : 2,5 a 8 bars. - Fluide : air filtre lubrifie ou non lubrifie. - Graissage preconise...

Open the catalog to page 5

Notre gamme de produits / Our products range Manipulation pneumatique: - Portiques - Unités linéaires - Modules rotatifs - Pinces de préhension Guidages pour vérins pneumatiques: - Unités de guidage en H (Classique, Renforcée, Lourde) - Unités de guidage en U (Classique, Légère) - Unités linéaires - Chariots à billes - Guidages en Inox - Guidages modulaires (paliers, accouplements, colonnes) Vérins guidés compacts Guidages pour motorisation électrique: - Tables à vis à billes ou vis trapézoïdale - Unités de guidage pour vérins à vis - Guidages en Inox pour actionneurs à tige - Unités linéaires...

Open the catalog to page 7

Pneumatic parallel grippers Type 24

Pneumatic parallel grippers Type 24

Catalog excerpts

All AVM AUTOMATION catalogs and technical brochures