*mydirectindustry

Catalogs
AVM AUTOMATION
Lifters with leadscrew and ballscrew Type 308N

Lifters with leadscrew and ballscrew Type 308N

Product catalog summary

Overview: The document provides technical specifications and options for the Type 308N lifters, which are designed for electric driving and are available with either leadscrew or ballscrew mechanisms. These lifters are suitable for vertical applications and can be adapted to various motor types, although motors are not supplied.

Specifications:

Materials: Aluminium and steel.
Guidance: Options include hardened steel rods with ball bearings or chromed steel rods with brass bearings.
Transmission: Leadscrew (non-reversible) or ballscrew (reversible) with right or left-hand thread.
Sizes: Available in four sizes with varying guide rod diameters and screw dimensions.
Performance: Maximum axial load ranges from 360 N to 1875 N, with axial accuracy of less than 0.15 mm for leadscrew and less than 0.07 mm for ballscrew.
Operating Conditions: Working temperature between 5°C and 80°C.

Options:

Motor adaptation interfaces and couplings.
Carriage with smooth holes for mounting.
Anti-corrosion versions and short body options available upon request.

Technical Data:

Weight: Varies by size and stroke length.
Friction and Speed: Guide friction ranges from 3 N to 6 N, with maximum linear speed up to 0.053 m/s for leadscrew and 0.25 m/s for ballscrew.
Efficiency: Mechanical efficiency for ballscrew is 0.85.

Mounting and Adaptation:

Crossed table assembly and mounting on base plate or carriage options are available.
Motor adaptation includes bell housing, shaft coupling, and screws.

Product Range: AVM Automation offers a variety of products including pneumatic handling systems, guided cylinders, manual tables, and electric motorization guides.

Catalog excerpts

Lifters with leadscrew and ballscrew Type 308N-1

Elévations à vis trapézoïdale et vis à billes Lifters with leadscrew and ballscrew Type 308N pour motorisation électrique / for electric driving

Open the catalog to page 1

Lifters with leadscrew and ballscrew Type 308N-2

- Fixation par son extremite renforcee pour application verticale - Guidage par 2 colonnes en acier trempe sur 4 douilles a billes ou par 2 colonnes en acier chrome sur 4 bagues bronze - Transmission par vis trapezoidale - pas a droite ou a gauche - Systeme irreversible - Adaptation a toute motorisation de votre choix : (brushless, pas a pas, DC ... , moteurs non-fournis) - Materiaux : aluminium et acier - Fixing with its reinforced end for vertical using - Guided by 2 rods in hardened steel on 4 ball bearings or by 2 rods in chromed steel on 4 brass bearings - Transmission by leadscrew - right...

Open the catalog to page 2

Lifters with leadscrew and ballscrew Type 308N-3

ELEVATION A VIS A BILLES / LIFTER WITH BALLSCREW - Fixation par son extrémité renforcée pour application verticale - Guidage par 2 colonnes en acier trempé sur 4 douilles à billes - Transmission par vis à billes roulée de précision - pas à droite - Système réversible - Adaptation à toute motorisation de votre choix : (brushless, pas à pas, DC … , moteurs non-fournis) - Matériaux : aluminium et acier - Fixing with its reinforced end for vertical using - Guided by 2 rods in hardened steel on 4 ball bearings - Transmission by ballscrew – right or hand thread – reversible - Adaptation of any motorization...

Open the catalog to page 3

Lifters with leadscrew and ballscrew Type 308N-4

ELEVATION A VIS / LIFTER WITH SCREW Montage en table croisée / Crossed table assembly Corps avec trous lisses / Carriage with smooth holes (4 vis fournies / delivered with 4 screws) Modèle 3081/308N1 3082/308N2 3083/308N3 3084/308N4 Montage croisé de 2 tables de taille différente : nous consulter Montage sur corps (ou plaque de base) / Mounting on carriage (or base plate) => voir/ see page N3-024 Type 308

Open the catalog to page 4

Lifters with leadscrew and ballscrew Type 308N-5

ELEVATION A VIS / LIFTER WITH SCREW Type 308N ( a commander separement / to order separately) Cette adaptation comprend : - la cloche pour la fixation du moteur - l’accouplement d’arbre - la visserie Masse / weight : ~ 0,300 kg cotes moteur Lorsque le deport est important, le guidage sur douilles a billes est preconise

Open the catalog to page 5

Lifters with leadscrew and ballscrew Type 308N-6

ELEVATION A VIS / LIFTER WITH SCREW Type 308N Sur plaque de base - en ligne / On base plate - on line : Ces adaptations comprennent la visserie et les 4 taraudages sur la plaque de base / These adaptations include screws and 4 threads on the base plate

Open the catalog to page 6

Lifters with leadscrew and ballscrew Type 308N-7

Manipulation pneumatique: - Unites lineaires - Modules rotatifs Guidages pour verins pneumatiques: - Unites de guidage en H (Classique, Renforcee, Lourde) - Unites de guidage en U (Classique, Legere) - Unites de guidage compactes et economiques - Unites lineaires - Guidages modulaires (paliers, accouplements, colonnes) Guidages pour motorisation electrique: - Tables a vis a billes ou vis trapezoidale - Unites de guidage pour verins a vis - Guidages en Inox pour actionneurs a tige - Unites lineaires pour moteurs LinMot Tables manuelles: - Tables simples - Tables economiques - Tables d'elevation...

Open the catalog to page 7

Lifters with leadscrew and ballscrew Type 308N

Lifters with leadscrew and ballscrew Type 308N

Catalog excerpts

All AVM AUTOMATION catalogs and technical brochures