*mydirectindustry

Catalogs
AVM AUTOMATION
Ball bearings guide Type 307

Ball bearings guide Type 307

Product catalog summary

Overview: The document provides technical specifications and options for Ball Bearings Guides Type 307, designed for use with pneumatic cylinders. It includes details on materials, options, sizes, and load capacities.

Specifications:

Guidance prepared for a standardized cylinder (not supplied).
Guided by two hardened steel rods on four ball bearings.
Protected by four wiper seals.
Materials: Anodized aluminum for housing and plates, zinc steel for coupling and screws.

Options:

Hydraulic shock absorber for speeds < 1 m/s.
Elastic absorber for speeds < 0.2 m/s.
Additional wipers for dusty environments available in nitrile or polyurethane.
Custom requests: bronze or polymer bearings, anti-corrosion version.

Sizes and Capacities:

Available sizes: 1 to 4, with guide rod diameters from Ø12 to Ø25 mm.
Weight and payload capacities vary by size, with maximum carried payloads ranging from 0.5 kg to 60 kg.
Working temperature range: 5°C to 80°C.

Load Capacities:

Static and dynamic load capacities are specified for each size, with recommendations for using ball bearings in dynamic, off-centered payload situations.

Applications:

Suitable for vertical offset mass applications, offering more rigidity than H-guides.
Can be used as a mobile carriage on tables (cylinder not supplied).

Additional Information:

For detailed dimensions and characteristics, refer to the accessories section on page M5-010.
Part of AVM Automation's product range, which includes pneumatic handling systems, guided cylinders, and manual tables.

Catalog excerpts

Chariots à billes Ball bearings guides Type 307 pour vérins pneumatiques / for pneumatic cylinders F - 68190 RAEDERSHEIM Tél: +33 (0)3.89.83.69.40 Fax: +33 (0)3.89.83.69.41 [email protected] www.avm-automation.fr

Open the catalog to page 1

CHARIOTS A BILLES / BALL BEARINGS GUIDES Descriptif : - Guidage prepare pour recevoir un verm normalise ( verin non-fourni ) - Guidage par 2 colonnes en acier trempe sur 4 douilles a billes - Protection du guidage par 4 joints racleurs - Materiaux : corps et plaques en aluminium anodise accouplement et visserie en acier zingue Description : - Guide prepared to receive a normalized cylinder ( cylinder not supplied ) - Guided by 2 rods in hardened steel on 4 ball bearings - Guide protected by 4 wipers seals - Materials: housing and plates in anodized aluminium coupling and screws in zinc steel...

Open the catalog to page 2

documentation, cao 3D => www.avm-automation.fr Page G4-022 / 15

Open the catalog to page 3

Taille 1 (colonnes 012) / Size 1 (rods 012) : Taille 2 (colonnes 016) / Size 2 (rods 016) : Taille 3 (colonnes 020) / Size 3 (rods 020) : Bagues lisses Douilles a billes / Plain bearings / Ball bearings Static* Dynamic Static* Dynamic Taille 4 (colonnes 025) / Size 4 (rods 025) : En dynamique, pour une charge deportee, les douilles a billes sont preconisees. In dynamic, for off-centred payload, ball bearings are recommended. *A adapter en fonction de la fleche / To be adapted according to bending : (0,5 mm maxi)

Open the catalog to page 4

Notre gamme de produits / Our products range Manipulation pneumatique: - Portiques - Unités linéaires - Modules rotatifs - Pinces de préhension Guidages pour vérins pneumatiques: - Unités de guidage en H (Classique, Renforcée, Lourde) - Unités de guidage en U (Classique, Légère) - Unités linéaires - Chariots à billes - Guidages en Inox - Guidages modulaires (paliers, accouplements, colonnes) Vérins guidés compacts Guidages pour motorisation électrique: - Tables à vis à billes ou vis trapézoïdale - Unités de guidage pour vérins à vis - Guidages en Inox pour actionneurs à tige - Unités linéaires...

Open the catalog to page 5

Ball bearings guide Type 307

Ball bearings guide Type 307

Catalog excerpts

All AVM AUTOMATION catalogs and technical brochures