E1070CW
4Pages

Avery Weigh-Tronix Checkweighers E1070 checkweigher Technical Specification DESCRIPTION General The E1070 Checkweigher from Avery Weigh-Tronix; combines rugged stainless steel construction with the proven accuracy of specially designed stainless steel load cells. The Avery Weigh-Tronix E1070 checkweigher allows precise monitoring of the machinery that dispenses product and gives the option to fine-tune any operation for maximum performance and profitability. The foundation of all Avery Weigh-Tronix checkweighers are Avery Weigh-Tronix bases, the industry standard for durability. Design The E1070 Checkweigher is completely wash-down safe and perfect for tough environments. It features stainless steel construction including base, column, load-cell and indicator enclosure. The standard indicator enclosure is adjustable from a vertical position to a tilt of 20 degrees. Features The E1070 includes a multi-segment fan graph for ¡¡fast evaluation. The operator can instantly verify that products are within the target range or above or below acceptable tolerance. In addition to its checkweighing feature also included are batching, counting, and peak measurement features. The E1070 has the ability to grow and adapt to new ¡¡processes. Switching easily from job to job, this indicator ¡¡applies to general weighing applications adding the capability of process control interface and data management. Uncomplicated, the E1070 checkweigher provides ¡¡process control and data management. Offering the advantage of the built-in interfaces—Ethernet 10/100, PROFIBUS® and DeviceNet™—the indicator is ideally suited for sharing data. In addition to network interfaces, the E1070 ¡¡connects to printers, remote displays, computers and SensorComm™. SensorComm is the Avery Weigh-Tronix micro-processor-based digital junction box. The bright LED display with 20 mm (0.8 in) digits allows ¡¡the operator to view weights with a quick glance. SPECIFICATIONS Environment 14° to 104°F (-10° to +40°C) Water washdown Humidity: 10% to 95% relative, non-condensing Agencies OIML, NTEP, EU Trade Approved, Canadian Weights and Measures, UL/CUL, CE marked, USDA compliant Indicator Power requirements Standard: 85-265 VAC 50/60 Hz @ 0.3 Amp max. Circuitry protection RFI, EMI, and ESD protection Display Green LED 20 mm, displays up to six digits Decimal Points: Configurable to any of six positions Units Displayed: lb, kg, custom Capacity selections: 999,999 with decimal located from zero to five places Keypad Numeric entry One Function key Dedicated Function Keys: Zero, Tare, Select, Print, Units, Standby, Escape, Enter, Clear 5Model E1070 Indicator Service ManualIntroductionAbout This ManualThis manual covers the information you need to configure and service yourModel E1070 Indicator.Major sections of this manual are headed by titles in a black bar like Intro-duction above. Subheadings appear in the left column. Instructions and textappear on the right side of the page. Occasionally notes, tips, and specialinstructions appear in the left column.Front PanelThe front panel, shown in Figure 1, consists of the keys and display.Figure 1E1070 front panel Plug the Model E1070 intoproperly grounded socket-outlet of the correct voltage,installed near the equipmentand easily accessible. Neveruse the unit without an appro-priate earthground connection.Any computer based systemshould have a separate,grounded power circuit. Werecommend one for theModel E1070.See the System Block Diagramor Main Board Assembly pagesin the technical illustrations atthe back of this manual forwiring instructions.

Annunciators Balance (Gross Zero); Motion; Gross; Tare; Pre-set Tare; Net; lb, kg, custom; Under/Target/Over; Print; Three Trip Outputs Load Cell Input Maximum Load Cells of 350Ù – Eight Excitation: Direct current Voltage: ± 5V dc Current: up to 230 mA Remote Sense: Compatible with 4-wire and 6-wire weight sensors. ìV/ per Division: 1.6 minimum. Resolution: Non- Approved 100,000, Approved 10,000. A/D Conversion Rate Display Update Rate: 1, 2, 5, 10 per second. A to D Rate: 100 per second A to D Type: Delta Sigma Internal resolution 53,687,100 counts per mV/V per second Excitation +/- 5...

Technical Specification E1070 Check checkweigher Torsion Bases The innovative Breakaway Load Transfer System keeps dropped loads and side loads from wrenching the shroud and damaging the loadcell. Proven 500% overload protection Torsion assembly in the scale base automatically transfers shock loads and overloads away from the load cell to the scale frame. Scale frame and shroud are all corrosion resistant stainless steel, suitable for food processing environments. Designed washdown resistant Tough, easy to clean stainless steel construction makes the scale immune to washdown and changes...

© Avery Weigh-Tronix group of companies 2008. All rights reserved. Avery Weigh-Tronix is a registered trade mark of the Avery Weigh-Tronix group of companies. This publication is issued to provide outline information only which, unless agreed by an Avery Weigh-Tronix group company in writing, may not be regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at...