Side Labelling ALS 204 LH (left hand) incl. L-Shape xed dispensing edge + Support + Product start sensor Description With this application, labels between 10 - 106 mm width (material width incl. backing paper max. 110 mm) can be applied on the side of products. The surface of the product needs to be at to secure smoothless apply. Paper and stiff PE label materials can be used. The maximum apply speed is 40 m/min.The support stand with vertical and horizontal lead screws enables exible integration onto a conveyor. The product start sensor has to be connected to the M12 plug on the ALS. Main specications ALS 204 Dispensing speed: Material width incl. backing paper: Label length: Label roll diameter: Data Interfaces Following parts are included: Pos-Nb. Art. Nb. Description 1 L-shape dispensing edge xture LH 110 mm L-shape xed dispensing edge LH 110 mm Fixing bolt assembly Fixture joint assembly Single H-Foot Horizontal lead screw 520 mm Vertical lead screw 1.010 mm Cross clamp Product start sensor Important benefits Flexible integration in your product line Attractive price-performance ratio Fast and durable for demanding applications High apply speed – up to 40 m/min Material width up to 110 mm Accurate label positioning Easy vertical and horizontal adjustment of the ALS by means of the lead screws

More details ... Typical applications: Side labelling Mainly applicable for labelling of products with at and straight side-surface. Almost all common types of label shapes are possible. Labels per minute (Q) for side labelling Productlength (product+distance) ALS 204 Examples Apply speed (V) 15 m/min 20 m/min 30 m/min 40 m/min 60 mm long + product distance 20 mm (P) 2. 100 mm long + product distance 20 mm (P) Calculation of maximum apply speed: P = product lenght + distance to following product Calculation of max. labels per minute: No rights can be derived from these calculations as application-specic...