(right hand) incl. L-Shape xed dispensing edge + Support + Product start sensor Description With this application, labels between 10 - 106 mm width (material width incl. backing paper max. 110 mm) can be applied on the top of products. The surface of the product needs to be at to secure smoothless apply. Paper and stiff PE label materials can be used. The maximum applyspeed is 30 m/min.The support stand with vertical and horizontal lead screw enables exible integration onto a conveyor. The product start sensor has to be connected to the M12 plug on the ALS. Main specications ALS 104 Dispensing speed: Material width incl. backing paper: Label length: Label roll diameter: Data Interfaces Following parts are included: Pos-Nb. Art. Nb. Description 1 L-shape dispensing edge xture RH 110 mm 1 L-shape xed dispensing edge RH 110 mm Flange plate assembly Single H-Foot Horizontal lead screw 390 mm Vertical lead screw 1.500 mm Cross clamp Product start sensor Extension cable for product start sensor 1.5 m Important benefits • • • • • • • Flexible integration in your product line Attractive price-performance ratio Top quality for standard applications Application speed of up to 30 m/ min Material width up to 110 mm Accurate label positioning Easy vertical and horizontal adjustment of the ALS by means of the lead screws

More details ... Typical applications: Top labelling Mainly applicable for labelling of products in the same height. Almost all common types of label shapes are possible. Labels per minute (Q) for top labelling Productlength (product+distance) ALS 204 Examples Apply speed (V) 15 m/min 60 mm long + product distance 20 mm (P) 2. 100 mm long + product distance 20 mm (P) Calculation of max. Labels per minute: Q = V x 1000 / P Calculation of maximum apply speed: P = product lenght + distance to following product No rights can be derived from these calculations as application-specic circumstances can...