*mydirectindustry

Horizontal balers

Product catalog summary

Overview: The document provides technical specifications and features of AVERMANN horizontal balers, specifically the AVOS 88 and AVOS 108 models. These machines are designed for continuous pressing of recycling materials such as paper, cardboard, plastics, and general waste, offering efficient and economical solutions worldwide.

Specifications:

Models: AVOS 88-7.5/30, AVOS 88-11/30, AVOS 108-7.5/30, AVOS 108-11/40.
Drive: Electro-hydraulic with power options of 7.5 kW and 11 kW.
Press Force: 300 kN for AVOS 88 models and 400 kN for AVOS 108-11/40.
Specific Press Force: 68.2 N/cm² for AVOS 88 models and 91.0 N/cm² for AVOS 108-11/40.
Channel Adjustment: Manual for AVOS 88 models and fully automatic for AVOS 108 models.
Binding: Three times vertically for all models.
Hopper Cross-Section: 800 x 800 mm for AVOS 88 models and 1,000 x 785 mm for AVOS 108 models.
Bale Size: 800 x 550 mm with adjustable length for all models.
Bale Weight: Up to 250 kg for AVOS 88 models and up to 300 kg for AVOS 108-11/40.
Cycle Time: Ranges from 14 to 26 seconds depending on the model.
Throughput: Theoretical throughput ranges from 60 to 105 m³/h, with maximum throughput from 2 to 3.5 t/h.
Weight and Dimensions: AVOS 88 models weigh approximately 3,600 kg with dimensions of 3,500 x 1,900 x 2,500 mm, while AVOS 108 models weigh approximately 6,800 kg with dimensions of 6,400 x 1,900 x 2,500 mm.

Special Features:

Special press ram for AVOS 108 (Patent No. DE 198 60 316 A1).
Optional equipment includes oil/air cooling unit, bin-lift-tipping device, bale slide, wire-end control, automatic channel adjustment, feeding hopper, wire coil holder, oil heating, feeding/inclined conveyor belt, perforator/rotary shredder, and prolongation of press channel for AVOS 88.

Applications: Suitable for pressing various materials into highly densified bales that are easy to transport and require minimal space.

Catalog excerpts

AVERMANN MASCHINENFABRIK GmbH & Co. KG Lengericher Landstraße 35 | 49078 Osnabrück/Germany | Tel.: +49 (0) 5405 5050 | Fax: +49 (0) 5405 6441 | [email protected] HORIZONTAL BALERS TYPE AVOS 88 / 108 AVOS 88 set up for continuous manual feed and automatic tying AVOS 108 with special press ram No matter whether pressing paper, cardboard, plastics or general waste - AVERMANN horizontal balers offer the best solution for different applications. AVERMANN horizontal balers are used for the continuous pressing of recycling material and valuable substances world-wide. The highly densified and fully automatically wire tied bales require a minimum of space only and can be transported very economically. Longevity and low power requirement as well as a steady operation guarantee a high efficiency of the AVERMANN horizontal balers.

Open the catalog to page 1

AVERMANN MASCHINENFABRIK GmbH & Co. KG Lengericher Landstraße 35 | 49078 Osnabrück/Germany | Tel.: +49 (0) 5405 5050 | Fax: +49 (0) 5405 6441 | [email protected] 037_SOR_AVOS88_108_GB_200703 Subject to technical change. www.avermann.com AVOS 88-7,5/30 AVOS 88-11/30 AVOS 108-7,5/30 AVOS 108-11/40 Electro-hydraulic 7.5 kW 11 kW 7.5 kW 11 kW drive Press force 300 kN 300 kN 300 kN 400 kN Specific press force 68.2 N/cm2 68.2 N/cm2 68.2 N/cm2 91.0 N/cm2 Channel adjustment manually manually fully automatically fully automatically Binding 3 times vertically 3 times vertically 3 times vertically 3 times...

Open the catalog to page 2

All AVERMANN Maschinenfabrik GmbH & Co. KG catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list