E²CON-GE ENGINE CONTROLLER

Product catalog summary

Introduction
The E²CON-GE Engine Controller is a retrofit system designed to modernize GE Jenbacher gas engines, enhancing their efficiency and integration into cogeneration plants. It supports engine types 3, 4, and 6, offering a flexible and expandable control system.

Specifications and Features
The system provides a comprehensive control solution with features such as closed-loop control of engine speed, power, and air/gas mixture, start/stop sequences, and high selectivity knock control. It includes reliable knocking and misfire detection, powerful diagnostic tools, and optional connection to the AVAT Virtual Service Center for plant integration.

Flexibility and Integration
The E²CON-GE system is designed for easy retrofit, allowing for the retention of existing cabling and components. It integrates grid code functions and supports synchronization and generator protection. The system is compatible with various gas types and plant configurations, including stationary and containerized cogeneration plants.

Advantages
The controller offers long-term update availability, integration into virtual power plants, and a single controller for both engine and plant management. It is supported by AVAT's extensive experience in the gas-engine industry and features robust industrial controllers and user-friendly interfaces.

Service and Support
AVAT provides comprehensive support, including electrical engineering, user training, and a qualified service hotline. The E²SERVICE tool offers remote access, parameterization, and diagnostics, enhancing service capabilities.

Conclusion
The E²CON-GE Engine Controller is a future-proof solution for modernizing GE Jenbacher gas engines, offering flexibility, reliability, and comprehensive support for efficient cogeneration plant operation.

Catalog excerpts

THE ENERGY ENGINEERING COMPANY E²CON-GE ENGINE CONTROLLER Retrofit system based on openECS for modernizing GE Jenbacher gas engines

Open the catalog to page 1

RETROFIT FOR GE Jenbacher GAS ENGINES FROM THE DEVELOPER AND MANUFACTURER OF TEM-EvoCOMPLETE CONTROL SYSTEM FOR GE Jenbacher GAS ENGINES: CONSTANTLY FLEXIBLE, ALWAYS EXPANDABLE Increasing the efficiency of gas engines in the context of modernization and new cogeneration plant operating concepts demand stable and performance-enhancing components as well as a more open and flexible gas engine control system. One that can keep the engine operating safely at the limit of its mechanical repowered parts while at the same time integrating it seamlessly into the cogeneration plant or into a whole network...

Open the catalog to page 2

E²CON-GE ENGINE CONTROLLER E 2CON-GE: OPEN UP YOUR GE Jenbacher GAS ENGINE FOR MORE FLEXIBILITY Our tailor-made engine controller for GE Jenbacher gas engines is a specialized control system which is open for all types of expansion. Functions, modules and subsystems harmonize with a high performance user interface to form a single unit. E²CON-GE is based on classic PLC components. A wide range of interfaces make them an ideal control center for integrating all types of components. User terminal with 15” capacitive touchscreen, adapted to the plant operator’s needs. Rapid overview of engine and...

Open the catalog to page 3

• GE Jenbacher Type 3, 4, 6 gas engines • Biogas, natural gas or special gases • Exhaust gas turbocharger with compressor bypass • Original throttle, bypass and mixer actuators • High voltage capacitor ignition system • Two-stage intercooler • Stationary cogeneration plants • Containerized system or installation in permanent structures • Synchronous AC generator, low or medium voltage • Island mode and grid-parallel operation • Grid code compliance • Auxiliary control covers GE Jenbacher scope of supply E2SERVICE - THE SERVICE TOOL FOR E2CON-GE THE openECS PRINCIPLE Based on openECS, our open,...

Open the catalog to page 4