XLR Hydraulic

Product catalog summary

Overview: The Autoquip XLR is a new industry standard lift that combines a near-zero lowered height with a traditional pan-style lift. It features an extremely low reach-over distance of 4 inches, which is the lowest in the industry, allowing easy operator access to pallets and loads. The XLR is available in both 36-inch and 48-inch travel models and can be actuated hydraulically or pneumatically.

Specifications: The XLR lifts have capacities ranging from 2,000 to 4,000 lbs and can travel up to 48 inches. They are available in various platform sizes to accommodate common load cube sizes.

Key Features:

4-inch reach-over for easy access
Near-zero lowered height
Lubricated-for-life composite bearings
Solid steel legs and hard-chromed axle pins
Double-wire braided hydraulic hoses with velocity fuses
Polyethylene reservoir for rust-free operation
Maintenance locks and pre-wired power unit
Built in accordance with ANSI MH29.1 standards

Benefits:

Maintenance-free bearings and extended bearing life
Minimal platform deflection
Controlled descent for safety
Easy access to hydraulic/electrical components
Ready to operate with minimal setup
Backed by a strong warranty

Options: The XLR offers options such as a rear bridge and a thru-flow load pattern, which adds 1/4 inch to the lowered height.

Power Supply: The XLR electric motor is internally mounted and available in either 1 1/2 hp three-phase or 3/4 hp single-phase, with a 24 VAC control valve.

Hydraulic and Air-Powered Models: The document provides detailed specifications for both hydraulic and air-powered models, including platform sizes, capacities, and weights.

Catalog excerpts

XLR Cut Sheet.QXP 2/4/03 10:07 AM Page 1 NEW! LOW PROFILE LOW-REACH PAN LIFTS The Autoquip XLR is the new industry standard combining near-zero lowered height and a traditional pan-style lift, with the extremely low reach-over distance previously available in expensive maststyle lifts. The XLR has the industry lowest reach-over of 4", providing easy operator access to pallets and loads being built up or broken INDUSTRY BEST 4" REACH OVER down over the side of the lift. The NEW XLR family is being launched in both 36" and 48" travel models. Available in both hydraulic and pneumatic actuation. The XLR has platform sizes to meet all common load cube sizes. w w w. a u t o q u i p . c o m

Open the catalog to page 1

XLR Cut Sheet.QXP 2/4/03 10:07 AM Page 2 XLR LOW PROFILE PAN LIFTS KEY FEATURES · · · · · · · · · · · · BENEFITS Industry best 4" reach over Near zero lowered height Lubricated-for-life composite bearings on all pivot points Solid steel legs Turned, ground, polished and hard-chromed axle pins Double-wire braided hydraulic hoses Velocity fuses on cylinders Polyethylene reservoir Maintenance (safety) locks in base frame Factory tested to 110% of capacity Pre-wired power unit with UL approved and labeled control components Built and designed in accordance with ANSI MH29.1 · · · · · · Maintenance...

Open the catalog to page 2

All Autoquip catalogs and technical brochures

Archived catalogs

Platform Ram Lift
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list