video corpo cad

PT series
4Pages

{{requestButtons}}

Catalog excerpts

PT series - 1

(A) Photo electric sensor ● Red LED status indication ● Allows to drive multiple sensors by single power ● Realization of convenience for wiring or power line ● Waterproof structure IP67(IEC standard) with waterproof cover, (waterproof structure IP66 with protection cover) (B) Fiber optic sensor (C) Door/Area sensor (D) Proximity sensor Please read “Caution for your safety” in operation manual before using. (E) Pressure sensor (F) Rotary encoder DC 3-wire type DC 2-wire type DC 3-wire type DC 2-wire type Power supply (Operating voltage) Leakage current Connection life cycle Cable tensile strength Insulation resistance Dielectric strength 1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours 500m/s²(50G) in each of X, Y, Z directions for 3 times (M) Tacho/ Speed/ Pulse meter (N) Display unit (O) Sensor controller (P) Switching mode power supply (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel Power indicator : Green, Operation indicator : Red Ambient temperature Ambient humidity (S) Field network device (AWG22, Core diameter: 0.16mm(TA), Number of cores: 17, Insulator out diameter: Ø1.67mm) Case: PC, General cable (gray): Polyvinyl chloride (PVC) Unit weight ※1: When using a cover for waterproof(P96-M12-1, sold separately: IP67(IEC standard) ※Environment resistance is rated at no freezing or condensation. G-11

Open the catalog to page 1
PT series - 2

※Cable specification : Ø9, 6-wire (Conductor cross section: 0.3mm2, Insulator diameter: Ø1.67) ※Cable specification : Ø9, 8-wire (Conductor cross section: 0.3mm2, Insulator diameter: Ø1.67) ※Cable specification : Ø9, 10 cores (Conductor cross section: 0.3mm2, Insulator diameter: Ø1.67) Waterproof cover(sold separately) Form Applicable model Protection cover Form Applicable model ※This protection cover is used for protecting unused connection hole from water or oil etc. ※If using waterproof cover, IP67 is available. ※Please tighten it. ※This protection cover is used for protecting unused...

Open the catalog to page 2
PT series - 3

(A) Photo electric sensor DC 2-wire type Blue (Power-) Brown (Power+) Power indicator LED Operation indicator LED Blue (Power-) Brown (Power+) (M) Tacho/ Speed/ Pulse meter (C) Door/Area sensor (D) Proximity sensor Blue (Power-) Brown (Power+) (B) Fiber optic sensor (P) Switching mode power supply (Q) Stepper motor& Driver&Controller Mounting dimensions (R) Graphic/ Logic panel (S) Field network device (T) Software 56.5 ※Mounting 4 / 6 / 8 holes are same.

Open the catalog to page 3
PT series - 4

Connection cable should be used for connector type of proximity sensor (PRCM Series). Cable type proximity sensor (PRW Series) can be connected directly but when the installation distance is longer, please use connection cable. Applicable models Connection Applicable proximity sensor box PRCMT12-2/4DO, DC PRCMT18-5/8DO, DC PRCMT30-10/15DO, DC DC 2-wire PT -2D type PRWT12-2/4DO, DC PRWT18-5/8DO, DC PRWT30-10/15DO, DC Connection cable Direct connection Connection cable Connection cable Direct connection Connection cable Connection cable Direct connection Connection cable ※It is enable to use...

Open the catalog to page 4

All Autonics catalogs and technical brochures

  1. BS5 series

    4 Pages

  2. BH series

    7 Pages

  3. MST series

    2 Pages

  4. BTS series

    7 Pages

  5. BC Series

    7 Pages

  6. PR series

    10 Pages

  7. LE7M-2

    12 Pages

  8. SP Series

    4 Pages

  9. PRA Series

    4 Pages

  10. AS series

    2 Pages

  11. PR series

    6 Pages