video corpo cad

PR series
6Pages

{{requestButtons}}

Catalog excerpts

PR series - 1

PR Series Cylindrical Type Proximity Sensor Cylindrical type proximity sensor •Improved the noise resistance with dedicated IC •Integrated surge protection circuit •Integrated overload & short protection circuit •Integrated reverse polarity protection circuit •Long life cycle and high reliability, and simple operation •Protection structure IP67 (IEC standard) •Replaceable for micro switches and limit switches Please read "Caution for your safety" in operation manual before using. 38 (*1) The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.

Open the catalog to page 1
PR series - 2

The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance. The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.

Open the catalog to page 2
PR series - 3

Cylindrical Type Proximity Sensor

Open the catalog to page 3
PR series - 5

Cylindrical Type Proximity Sensor EControl output diagram SiSThe load can be connected to either wire. SiSThe load can be connected to either wire.

Open the catalog to page 5
PR series - 6

UProper usage OLoad connections < DC 2-wire type & AC 2-wire type > < DC 2-wire type > < AC 2-wire type > When using DC or AC 2—wire type proximity sensor, the load must be connected, otherwise internal components may be damaged. The load can be connected to either wire. Hn case of the load current is smal It may cause return failure of load by residual voltage. If the load current is under 5mA, please make sure the residual voltage is less than the return voltage of the load by connecting a bleeder resistor in parallel with the load as shown in the diagram. Bleeder resistor(R) [ PAction...

Open the catalog to page 6

All Autonics catalogs and technical brochures

  1. BS5 series

    4 Pages

  2. BH series

    7 Pages

  3. MST series

    2 Pages

  4. BTS series

    7 Pages

  5. BC Series

    7 Pages

  6. PR series

    10 Pages

  7. LE7M-2

    12 Pages

  8. SP Series

    4 Pages

  9. PT series

    4 Pages

  10. PRA Series

    4 Pages

  11. AS series

    2 Pages