video corpo cad

BH series
7Pages

{{requestButtons}}

Catalog excerpts

BH series - 1

Front/Side Installation Type E Features • Easy front (M18 nut) and side (M3 bolt/nut) installation • NPN open collector / PNP open collector simultaneous output • Sensing distance: Through-beam type 20m / Retroreflective type 4m / Diffuse reflective type 1m, 300mm • Small size: W14xH34.5xL28mm • M.S.R. (Mirror Surface Rejection) function prevents malfunction from reflective objects such as metals or mirrors (retroreflective type) • Sensitivity adjuster • Light ON/Dark ON selectable by switch • Operation indicator (red LED) and stability indicator (green LED) • Power reverse polarity protection circuit, Output short over current protection circuit • Interference prevention function (except through-beam type) • IP67 protection structure (IEC standard) Retroreflective Diffuse reflective type type Reflective tape (MST Series) Please read “Safety Considerations” in operation manual before using. 1: The sensing distance is specified with using the MS-2A reflector. The distance between the sensor and the reflector should be set over 0.1m. When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the ‘0 Reflectivity By Reflective Tape Model’ table before using the tape. *2: Non-glossy white paper 3001300mm. *3: Non-glossy white paper 1001100mm. *4: The weight includes packaging. The weight in parenthesis is for unit only. *The temperature or humidity mentioned in Environment indicates a non f

Open the catalog to page 1
BH series - 2

Front/Side Installation Type Feature Data Through-beam type: BH20M-TDT Parallel shifting characterisitic Measuring method Data Angle characteristic Measuring method 25 (B) Fiber Optic Sensors (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets Center Right Operation angle θ Retroreflective type: BH4M-PDT Parallel shifting characterisitic Measuring Data method Sensor angle characteristic Measuring Data method Reflector angle characteristic Measuring Data method (I) SSRs / Power Controllers (M) Tacho / Speed / Pulse Meters Diffuse reflective type BH1M-DDT Sensing area...

Open the catalog to page 2
BH series - 3

BH Series Connections Through-beam type Sensing target (black) NPN output (white) PNP output Retroreflective type Diffuse reflective type - (blue) (black) NPN output Sensing target Reflector (MS-2A) Reflective tape (MST Series) (black) NPN output (white) PNP output Control Output Diagram Photoelectric sensor circuit Output short over current protection circuit Main circuit NPN/PNP open collector simultaneous 2 output Output short over current protection circuit Operation Mode Operation mode Received light Interrupted light Received light Interrupted light Transistor output (NPN/PNP)...

Open the catalog to page 3
BH series - 4

Front/Side Installation Type Sensitivity adjuster (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets © Retroreflective type/Diffuse reflective type Sensitivity adjuster (L) Panel Meters (M) Tacho / Speed / Pulse Meters (Q) Stepper Motors & Drivers & Controllers

Open the catalog to page 4
BH series - 5

d Operation Timing Diagram © Through-beam type High Stable light ON area Unstable operation area Stable light OFF area Stability indicator (green LED) Operation indicator ON (red LED) OFF Transistor output (NPN/PNP) 1 Retroreflective type / Diffuse reflective type High Stable light ON area Unstable light ON area Unstable light OFF area Stable light OFF area indicator (green LED) Operation ON indicator (red LED) Transistor ON output OFF (NPN/PNP) light level Operation level XThe waveforms of "Operation indicator" and "Transistor output" are for Light ON, The waveforms are reversed for Dark ON.

Open the catalog to page 5
BH series - 6

H Installation and Sensitivity Adjustment © For mounting Please use M18 fixing nut or M3 bolt and nut to mount the sensor, and make sure that the tightening torque is under 0.5N-m. ^Exercise caution. Do not apply excessive impact to the unit or bend the cable section. The inside unit may be wet. <Front mounting> M18 Fixing Nut M18 Fixing Nut © Operation mode switching Light ON XFor through-beam type, the selection switch is built-in the receiver. © Sensitivity adjustment (D) Proximity Sensors <Side mounting> © Optical axis adjustment •Through-beam type Set the emitter and the receiver...

Open the catalog to page 6
BH series - 7

^This reflectivity is based on the reflector (MS-2A). •>KReflectivity may vary depending on usage environment and installation conditions. The sensing distance and minimum sensing target size increase as the size of the tape increases. Please check the reflectivity before using reflective tapes. ^For using reflective tape, installation distance should be min. 20mm.

Open the catalog to page 7

All Autonics catalogs and technical brochures

  1. BS5 series

    4 Pages

  2. MST series

    2 Pages

  3. BTS series

    7 Pages

  4. BC Series

    7 Pages

  5. PR series

    10 Pages

  6. LE7M-2

    12 Pages

  7. SP Series

    4 Pages

  8. PT series

    4 Pages

  9. PRA Series

    4 Pages

  10. AS series

    2 Pages

  11. PR series

    6 Pages