video corpo cad

BC Series
7Pages

{{requestButtons}}

Catalog excerpts

BC Series - 1

BC Series Color Mark Sensor Color Mark Sensor Feature • Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - 3-step sensitivity adjustment for each mode (fine, normal, rough) • External light interference reduction minimizes errors and allows stable detection • Check reference color with teaching indicator • Operation indicator (red LED), stability indicator (green LED), timer indicator (orange LED) • Configure operation functions with external input from wiring • W1.24 x L6.7 mm spot size for detection of tiny targets and color marks • IP67 protection structure (IEC standard) C€ H Overview General photoelectric sensor detects present or absent of target by light. Color mark sensor detects colors of surfaces by RGB (red, green, and blue) light source. Saving the desired color at the inner memory, color mark sensor emits RGB LED light source to the target sequentially. Color mark sensor calculates ratio of the three colors, RGB, for the optimized sensing via the inner light collection lens. Using off-axis optical system for minimized optical loss, and cylindrical lens, BC Series compares setting color and sensing color with full-color determination. H Applications A Please read “Caution for your safety” in operation manual before using. (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets Packaging, stickers industry: Label status, Mark color check, etc. Electronic components, semiconductor industry: Defective unit check, Connector color check, etc. (M) Tacho / Speed / Pulse Meters (Q) Stepper Motors & Drivers & Controllers *1: The weight includes packaging. The weight in parenthesis is for unit only. *The temperature and humidity of environment resistance is rated at non-freezing or condensation.

Open the catalog to page 1
BC Series - 2

• NPN open collector output • PNP open collector output • Connector cable (sold separately) ^Connector cable model : CIDH4C (connector length □: 2, 3, 5, 7m) XPlease refer to the G-6 for connector cable. 0 Operation Mode XThe waveforms of “Operation indicator” and “Transistor output” are for color match mode operation. They are opposite operation for color mismatch mode operation. 1. Operation indicator (OUT): ON (red) indicates operation. 2. Stability indicator (STB): ON (green) indicates stable status. 3. Timer indicator (TMR): ON (orange) when timer is set. 4. Teaching...

Open the catalog to page 2
BC Series - 3

Color Mark Sensor Dimensions M3 Tap (B) Fiber Optic Sensors (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets (I) SSRs / Power Controllers (M) Tacho / Speed / Pulse Meters (P) Switching Mode Power Supplies Installation and Sensitivity Adjustment I ①nstallation : Place the color mark sensor and the target object facing each other then affix the unit. The installation distance should be within ±2mm of 15mm . P ② ress the SET key to enter teaching standby status. Place the desired color at the sensing position (spot) and hold the SET key for 3 seconds to set the reference...

Open the catalog to page 3
BC Series - 4

S Functions O Color teaching Set the reference color with the teaching function. Press the SET key in RUN mode to enter teaching standby status. Place the desired color at the sensing position (spot) and hold the SET key for over 3 seconds. When teaching is complete, the teaching color indicator will turn ON. When there is an error, the operation indicator will flash (red). O Display teaching The set reference color can be displayed on the teaching indicator. With the ability to check the set reference color there is no need to re-set the teaching color every time. It may difficult to check...

Open the catalog to page 4
BC Series - 5

Color Mark Sensor Reference color Color code Color sensing distance by mode C (color only) mode (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets C+I (color + intensity) mode (M) Tacho / Speed / Pulse Meters C (color only) mode (Q) Stepper Motors & Drivers & Controllers C+I (color + intensity) mode

Open the catalog to page 5
BC Series - 6

BC Series Color sensing angle by mode C (color only) mode Green Green Green Green Blue Blue Blue Sky blue Sky blue Sky blue Purple Purple Purple Yellow Yellow C+I (color + intensity) mode C (color only) mode C+I (color + intensity) mode

Open the catalog to page 6
BC Series - 7

(F) Rotary Encoders (G) Connectors/ Connector Cables/ Sensor Distribution Boxes/Sockets (M) Tacho / Speed / Pulse Meters (Q) Stepper Motors & Drivers & Controllers

Open the catalog to page 7

All Autonics catalogs and technical brochures

  1. BS5 series

    4 Pages

  2. BH series

    7 Pages

  3. MST series

    2 Pages

  4. BTS series

    7 Pages

  5. PR series

    10 Pages

  6. LE7M-2

    12 Pages

  7. SP Series

    4 Pages

  8. PT series

    4 Pages

  9. PRA Series

    4 Pages

  10. AS series

    2 Pages

  11. PR series

    6 Pages