U s e r - f r i e n d l y and comp act system fo r i o n i z i n g and d u st collection AUTOMAX S.A. - Z.A. - Rue de Champ Chardon 41250 MONT PRES CHAMBORD - FRANCE E-mail: [email protected] www.automax.fr

No need to go to a dust collector bench. Contributes to streamlining in the cell or line production. Consid erably less powe r consumption Nozzle-Type Ionizers Running costs are greatly reduced as a dust collector is no longer required. Air consumption can be further reduced by using pulse blow. E a sy maintenance Dust is collected on the self-adhesive urethane gel sheet. Just wash the sheet off with water to restore the adhesiveness. Set the ionizing blow time suction fan P Powerful dust removal pulse blowu l s e LOW Pulse mode enables more efficient dust removal by intermittent air blow. Select...

・Removing static electricity and dust from the following products: ・Cleaning part trays. ・ Removing static electricity and  dust removal - substrate - semiconductor devices - optical lenses - housing of mobile phone or smart-phone - parts before assembly etc. - before UV protection process - before silk printing - before packaging etc. The flow control dial on the backside enables to adjust the ion airflow. A paper pack filter can be attached to the exhaust port on the rear side (standard). A φ75mm exhaust duct can be connected by exchanging the flange The adhesive gel sheet plate with magnets...

External dimensions Electrode Needle (two sheets required per unit) (for N -1) (5PC set) Urea resin screw Sensor Super Slim Nozzle Power Connector Auto off timer Time setting DIP Pulse cycle selector Continuous/ Pluse mode selector Flow control dial Electrode Needle Paper pack filter (two sheets required per unit) (for N -1) Dust flange Urea resin screw Super Slim Nozzle Power Connector Auto off timer Time setting DIP Flow control dial Pulse cycle selector Continuous/ Pluse mode selector Air tube fitting Exhaust port A dust collector should not be connected to the exhaust duct . A load will be...