Electrostatic Meter Ion Balance and potential charge
2Pages

Product Specifications Negative side bar graph Positive side bar graph Range (display scale switched during measurement) MAX (during maximum value display) EL (when backlight is ON) HOLD A. ON (when automatic power OFF mode is disabled) (when stopping measurement temporarily and holding measurement value) IB (when "ION BALANCE mode" is active) Polarity display Unit Battery level (4-stage) Measurement value (specified value) Electrostatic Meter shows the peak values of charged potential and ion balance Dimensions and part names Ion Balance Plate Ground cord Static charge voltage measuring Arigator clip Large LCD display (digital and bar graph) Digital reading: three digits. Bar graph: Positive polarity is displayed to the right, and the negative polarity to the left. Functions: MAX, HOLD, IB, A.ON or EL can be selected. Battery level: The battery level is indicated with a battery mark. Measurement range : 0 to ± 22.0 kV Over range display : Value flashes, buzzer sounds (when exceeding ± 22.0kV) Digital reading : LO range 0 to ±1.50 kV (□.□□ kV) HI range ± 1.0 to ± 22.0 kV (□.□□kV) Bar graph display : LO range ± 0.1 kV per bar HI range + 1.5 kV per bar Measuring distance : 25mm ±0.5mm (between charged object and the Eye-02) Ion Balance voltage measuring Measurement range : 0 to ± 220 V Over range display : Value flashes, buzzer sounds (when exceeding ± 220V) Digital reading : 0 to ±220 kV (□□□ V) Bar graph display : ± 15 V per bar Grounding Terminal Screw thread Caution Label Strap STATIC/I.B.Button HOLD/MAX button POWER Button ±10% (LCD display renewal rate: 5 times/second) Response time Power is turned off automatically after five minutes. Switch between on and off by pressing the power button. Display lamp LED white lamp to assist reading in insufficient brightness Switch between on and off by pressing the power button. ZERO Function The value and bar display can be reset to 0. Hold down the ZERO button during measurement. ZERO Button The state can be changed between “temporarily hold the measurement (HOLD)” and “hold the maximum value during measurement (MAX)” may be subject to change without prior notice. with HOLD/MAX button. Beep sound Beep sound will be heard during Power-on, Power-off, Over-range, etc. Power source 9V DC (006) battery (1pce) Approx. 30 hours (using alkaline battery) Maximum working time ZA Champ Chardon 41250 Mont Près Chambord Tel. +33 (0)254 553 810 Fax +33 (0)254 708 126 info@automax.fr - www.automax.fr Ambient conditions Overall size 123.1 (L)×70 (W) ×25.3 (H)mm; without Ion Balance plate 131 (L) ×73 (W) ×25.3 (H)mm; with Ion Balance plate Weight with battery 170g; without Ion Balance plate 200g; with Ion Balance plate Materials Case: Conductive resin (ABS), Ion Balance Plate (SUS) Ion Balance Plate x 1, Ground Cord w/ alligator clip x 1, Ca

Charged Potential Measurement - check anywhere with this handy tester Point The Eye-02 is ideal measurement device of ionizer's ion balance as well as static electricity, both of which are invisible. Confirm neutralization effect with values in the static electricity control area. 1. Maximum (peak) value display This function is efficient for measurement of the "charge of workpieces traveling at a high speed", in which the value changes rapidly, and also efficient for "continuous" measurement, in which changes are monitored over time. 2. Automatic power OFF / continuous measurement The...