Roller marking machines
16Pages

MARKING SYSTEMS ROLLER MARKING MACHINES SMALL DIAMETERS MEDIUM SIZED DIAMETERS SPECIAL ROUND COMPONENT SPECIALS APPLICATIONS MACHINE BUILDER FROM 1948

AUTOMATOR INTERNATIONAL Marking Systems IMPACT MARKING Impact and roller marking machines available as manual, pneumatic, electro-pneumatic models for permanent marking HOT MARKING Hot marking for products such as leather, plastic, paper, wood, cloth, with or without colour MULTI PIN MARKING Highly sophisticated and very fast computerised systems SINGLE PIN MARKING Versatile and technologically advanced systems for marking text or logos in an arc, angle, or straight line, via a PC READING AND TRACKING Reading via a camera and processing of the matrix OCR computerised marking TAG MARKING...

AUTOMATOR INTERNATIONAL presents its extensive range of standard and special machines for marking, stamping, identifiying, punching, numbering, lettering etc. ... in other words for leaving an indelible and permanent mark on any surface or product whatsoever. Impeccable quality and the highest technology are the basis for our ability to meet the most demanding and varied requirements of our customers, whatever branch of industry they may come from. The extensive range which constitutes the AUTOMATOR program provides the highest productivity using the latest production processes. More than...

SMALL DIAMETERS • The manual roller marking machine for the perfect marking of round components, either solid or hollow from 8-65mm diameter. • Solid round components are marked using roller support, type S2R.Thin walled hollow parts are marked using mandrel support type S1R. MECHANICAL DRAWING Front We reserve the right to amend specifications whitout notice, you can download the last release on our site at: http://www.automator.com/Download.asp • Motorized version of the machine MB41N. • With geared motor connected to 380V, 3 phase, 50 Hz. • Mounted on bench, model TP. • Twin push button...

• Manually operated machine for marking, graduating numbering etc. of cylindrical, conical or flat components. Maximum diameter of round components: 110 mm • Simple setting of depth of mark. • The table is fitted with spring washers to even out differences in diameter and to achieve consistent depth of mark. • Large range of accessories available. MECHANICAL DRAWING Front Mod. MB 71UE • Electrical marking unit with slide movement via a geared motor. • For marking, graduating, numbering of cylindrical, conical and flat components. • Linear marking takes place by rolling • Specially designed...

MEDIUM SIZED DIAMETERS Mod. MB 71E • Electrically operated roller marking machine for marking, graduating, numbering of variously shaped round components up to a maximum of 110 mm diameter. • Simple setting of the depth of mark. • The table is fitted with spring washers to even out differences in diameter and to achieve consistent depth of mark. • Operation is via electrical twin push buttons. All electrical components are built into the bench, type TG. MECHANICAL DRAWING Front • Electrically operated machine with additional pneumatic movement of the table.This ensures perfect and uniform...

CONTINUOUS ROLLER MARKING Continuous, repeated marking on bars, hexagonals, tubes and profiled material etc. The symbols, logos or text are rolled into the material using a marking roller of 60 mm diameter. Production rate: 6 metre/min. Output can be doubled by using two rollers simultaneously. We reserve the right to amend specifications whitout notice, you can download the last release on our site at: http://www.automator.com/Download.asp MECHANICAL DRAWING Front

MECHANICAL DRAWING • These roller marking machines will mark horizontally placed round parts and flanges up to 650 mm diameter. • The maximum length of text must not exceed 180 mm, but can be one or more lines. • Deeper marking can be achieved by repeating the same marking cycle several times.The part to be marked is pressed against the typeholder using spring washers with adjustable resistance. • Loading and unloading are carried out manually. • The machine is operated using twin push button actuation. • The pneumatic model (EP) has an approach sroke of 22 mm (to feed forward the part to...

SPECIAL ROUND COMPONENTS Mod. MB 76N Mod. MB 76E Mod. MB 76EP Side Rear We reserve the right to amend specifications whitout notice, you can download the last release on our site at: http://www.automator.com/Download.asp MECHANICAL DRAWING • With these roller marking machine vertically positioned round components, rings etc up to 1000 mm diameter can be marked with any required text. • The pneumatic model (EP) has a vertical movement of 22 mm. • The maximum length of text is 180 mm and can be of one or more linea. • Deeper marking can be achieved by repeating the same marking cycle several...

noto rating We reserve the right to amend specifications whitout notice TECHNICAL DATA TECHNICAL SPECIFICATIONS

SPECIAL APPLICATIONS High pressure valve body marked on a MB 71EP MARKING OF FIRE EXTINGUISHER BODIES The sheet metal, after it has been rolled and welded is marked with the following information: • Supplier’s name • Supplier’s code • Full capacity • Date of manufacture • Sequential serial number All this information is marked in one operation using a MB76EP fitted with a special numbering head with typeholder attached. Marking time is less than 3 seconds. MARKING OF SAFETY VALVES AND FLANGES All valves have to be marked with their own specific details: date, pressure, volume, manufacturer...

ROLLER SUPPORTS We reserve the right to amend specifications whitout notice, you can download the last release on our site at: http://www.automator.com/Download.asp The supports designed by Automator International are intended to help the operator ensure that the force is always applied equally and that a perfect mark is produced every time.This is due to the accuracy with which every item is designed and tested. S2R e S2R Mignon The twin roller supports S2R and S2R mini are used on roller marking machines to rotate the part to be marked.The marking head causes the part to be rotated during...