ASM40150 - Scribe marker
8Pages

ASM40150 - Scribe marker Marking area 40x150mm | 1.6 x 5.9" Air supply/filter Marking head Benchtop Mode High quality at higher speed Very LOW NOISE compared to Dot Peen markers COMPACT marking unit Easy integration with PLCs and Host Computers TTF, 2D codes, arcs and logos Unlimited range of stored marking programs System overview The new Scribe Marker ASM40150 is the ultimate solution for silent and fast marking on metals and plastics. It provides a very large marking area in a very compact head. Our proprietary piston designs against the material to be marked, marks in fully former, continuous mark. The shape, the size and the position of the engraved characters are determined by the user via the AC500 software. The system consists of  Marking head, with pin/cartridge and 4m controller-marker cable  Universal Controller AC500  Air Filter  Power supply adaptor and cable

ASM 40150 - Scribe Marker System Scheme Marking Head Controller/Marker cable ON/OFF button ETHERNET Power supply 48V Optionals Communication protocols (go to page 5) Marking Head Marking Head - Technical data Overall dimensions: LxWxH (mm | inches): Weight (kg | lbs): Marking area (mm | inches): Power supply (V): Air supply (Bar): IP certification of the Cover: Working temperature (°C - °F): Stock temperature (°C - °F): Humidity (%): Cartridge available: Pins available Connectivity: Marking head - Marker/Controller cable Super flexible cable for continuous marking applications, which...

ASM 40150 - Scribe Marker Marking head - Marking speed The speed depends on various factors, such as the font height, the scribe depth, the desired quality and so on. With standards fonts height, the system can mark three characters per second. Marking head - Marking depth The depth of mark depends on the drive air pressure and on the material of the item to be marked. On aluminum with a thickness of about 1 mm|0.40", a marking depth of 0.95 mm | 0.03" it's possible. In thinner materials, the marking depth may increase. In cold rolled steel a marking depth up to 0.5 mm (0.02") it's...

Controller AC500 The Automator Universal Controller AC500, with a 7" touch screen display, allows an easy and intuitive navigation in the software program, thanks to its stylus pen. Equipped with Serial port, USB interface and I / O connector, located on the rear, the controller is available in both bench and panel version for integrations. Controller AC500 - Technical Data Overall dimensions LxWxH (mm | inches): Weight (kg | lbs): Material of the cover: IP certification of the cover: Power supply (V): External power supply: Humidity (%): Working temperature (°C | °F): Fixed Memory Card...

Controller AC500 - Technical Drawings WARNING Do not block air vents on the side of the case. The marking system must be electrically isolated from any other device that may generate electromagnetic interference. Controller AC500 - Scheme Lines, arcs, circles Serial numbers Font TTF Upload/download files (DXF 6 BMP) Datamatrix, QR and Barcodes Importable files Alarm history Multilingual Fixed flash memory Motorized Theta and Z axis Scheduled and remote maintenance Bar Code Scanners and 2D Code Readers Foot Start/stop button Logo and font generator software

Universal Controller Software The AC500 coupled with our Automator software allows an intuitive user interface with absolute graphic flexibility. Thanks to the touch screen graphic display, it is easy to navigate and to create messages to be marked and parameters. The preview allows to represent exactly what will be marked and any change in the message will be displayed instantly. The software provides for the creation of messages with the date in various formats, fix or variable texts, codes, serial numbers, Datamatrix and logos. Possible the creation of the programs on the PC (running...

Extended Protocol The extended protocol is bidirectional and available for marking applications that need serial communications. It includes error checking/alarm and a range of transmission messages Types: SOH, TYPE, [##] , STX, [DATA], ETX, BCC, CR   SOH (ASCII) - The AC500 controller ignores all characters received before the SOH. TYPE (printable ASCII character) - It defines the types and content of the message from the host Type 1 - It overwrites a field in the loaded marking with data from the Host. Type P - It specifies the marking name to be loaded Type Q - It updates the marking...

ASM 40150- Scribe Marker Configurations In addition with the production lines integration mode, ASM6090 can be set on a toolstand for workstation marking applications Benchtop configuration Double aluminum toolstand with Z axis adjustment knob adjustable for the surface to be marked. *TRADEMARKS Automator, ASM and AC500 are registered trademarks of Automator International Srl. Windows is a registered trademarks of Microsoft Corporation Bluetooth is a registered trademark of Bluetooth SIG, Inc. CanOpen is a registered trademark of CAN in Automation Inc CClink is a registered trademark of...