Transfersystem with automatic gripper rail change
3Pages

Automatic-SystemeGmbH DREHER ׷׷ Obere Talstrasse 1-5 D - 72172 Sulz-RenfrizhausenTel.: +49(0)7454/881-0 Fax: +49(0)7454/881-11 www.dreher.de info@dreher.de >

Coil loop Coil handling equipments in the short and normal design belong to its product range, just as transfer systems for sheet metal forming as well as for cold warm and hot forging. Further core business area of Dreher includes cut-to-lengths lines, destackers and feeder. The product range is complemented with hydraulic decoilers, pneumatic feeders, lubricating units, quick-die-changing systems and flexible punching and bending machines. Additional customer-specific components, such as robotics, welding equipment, marking units, etc. can be integrated in to the production lines.In a...

Automatic gripper rail changing > The transfer rail centre pieces can be put down and docked at die change by key press, from one operator. The transfer rails are put down on the press console table via lowering down of the rails and are safely locked. The second die sliding table with the preliminarily put up transfer rails, which are also on the press console table fixed, shortens the tool change to about 10 minutes. Such short die change periods allow several die changes in a day and to produce medium and small quantities in economic terms fully automatic. For the increasing model range...