Transfer system for cold, warm and hot forging
6Pages

- Cold, warm and hot forming - >

The Transfer systems for the the forging industry are used in the production of cold, warm and hot forged parts. These systems are designed and built for high volume production of a large amount of forged parts as for an example, used in the automobile industry. All positions and movement of the gripper rails are freely programmable. The boxes and gears for clamp and lift movements are of solid design and sealed against dirt, cinder and lubricants. The clamping and lifting motion of the transfer rails can be individually programmed and allows for asymmetrical rail positions and movements of...

Our transfer systems are used in many areas within the forging industry. Some of these are:- near net shape parts - cold, warm and hot forged parts - swaged forgings - bulge formed parts The rail drive is placed on the top of the gripper rails, closing and lifting drives are placed outside the press, individually operated by two servo motors each. Transfer system for the manufacture of hot forming automotive parts Transfer system for the manufacture of cold forming automotive parts Right from the design of our transfer systems we project the use of same parts as possible. This parts are...

The controls and operation of our transfer systems are built with Siemens PLC and components. By request other control units are available, for example by Allen Bradley PLC and components. > The secure control of the transfer operation occurs with a Siemens CNC-840 D or with an Allen Bradley Control Logix . > For the operation and visualisation of our transfer systems we use the following Siemens components:Touchpanel TP 27 with 10 display or MP 370 with 12Ԕ displayOperation terminal MP 270 with 10 display or MP 370 with12Ԕ displayIndustry PC Typ PCU 50 / OP 12 with 12 display or the...

Transfer systems Transfer systems - Sheet forming Transfer systems - Cold, warm and hot forging Blank loaders Insertion units Walking beam transfer systems Feeders with and without lifting stroke Press linking systems Stacking devices for finished parts > Coil processing equipment Coilers and decoilers Straightening units Coil cradles Roller feeds Scrap cutters Parallel shears Lubricating and spraying equipment Strip feed units Feeder straighteners Strip transfer lines Punching equipment Safetygards Monitoring and control systems Installation project work Software development > From...