Military Specification Packaging Film (MLT1) MLT1 material is a waterproof and greaseproof bagging material that conforms to MIL-DTL-117H as Type II, Class C, Style 1; MIL-PRF-121G (opaque) specification. This co-extruded film has excellent barrier properties, is extremely strong, and has a sealant layer that facilitates high quality seals on Autobag® packaging machinery. Genuine Autobag MLT1 bags-on-a-roll are a cost effective alternative to kraft paper bags. MLT bags are system-matched and guaranteed to run on Autobag baggers and integrated systems. User Benefits Typical Applications • Mil spec compliance • Excellent barrier properties • Superior strength with high integrity side seals • Government/Military Packaging • Waterproof or Greaseproof Packaging • O-rings, Seals and Other Packings • Food Packaging • Any application requiring low MVTR and OTR Technical Specifications Compliances MLT1: Press Printing: Imprinting: Trim Seal: Mil Thickness: Configuration: Performance Data: MIL-DTL-117H, Type II Class C, Style 1 (opaque) MIL-PRF-121G (opaque) FDA 21 CFR 177.1350 & FDA 21 CFR 177.1520 Yes Yes No Please note: Requires high integrity 4.0 side seals (HIS) and no holes in the bag for mil spec compliance. Autobag with restrictions Haze Puncture Resistance (Dart) Tensile Strength MD Tensile Strength TD Elongation MD Elongation TD Elmendorf Tear MD Elmendorf Tear TD OTR MVTR U/M % Grams psi psi % % grams grams cc/100in2/day g/100in2/day Above chart reflects nominal test values. Actual results may fluctuate due to inherent process variation. Test data and mil thickness reflect MLT1 material only. Certain minimum purchase volumes may apply. ©05/13 Automated Packaging Systems, Inc. Features, Options & Technical Specifications subject to change.