FIBER OPENING AND BLENDING AUTEFA Solutions leads the way

AUTEFA SOLUTIONS - Experience, Know-How and Competence in Nonwoven Technology AUTEFA Solutions leads the way to Fiber Opening and Blending AUTEFA Solutions offers complete carding lines, starting from bale opening up to finished products. The composition of a blending line, as well as the type and configuration of each machine, is flexible and can vary according to the fibers to be processed and to the final product to be manufactured. Each line is configured on the customer needs, in order to reach the best efficiency required by the process. As a system supplier, AUTEFA Solutions represents...

Bale Opener The Bale Opener is suitable for any kind of fibers, of short and medium length. It is complete with double horizontal conveyor and can be loaded with full bales, of any dimension and weight. discharge roller are of large diameter and driven by an independent motor gear box. The opening of the bales is done by a spiked PVC apron with internal slats with galvanized steel pins, driven by an inverter. The combing roller and the TECHNICAL DATA: Working width: 1600 mm / 2000 mm / 2500 mm Production: up to 2000 kg/h without Weighing Pan, 300 kg/h to 1000 kg/h with Weighing Pan Transversal...

This Blending Box is able to do the final blending and to provide some storage between the blending line and the card to ensure constanct production. It can be used for re-feeding the side wastes and reclaimed fibers. The Blending Box is composed of a storage unit, in the rear side, and of an emptying unit on the front side. The storage unit has a conveyor belt to transport the fibers to the stationary emptier. The emptying unit has a heavy duty spiked apron, that removes the fibers from conveyor belt, and delivers them on a transversal conveyor, towards a delivery chute. FOR THE FILLING SYSTEM,...

The Fine Opener FTO is probably the best fine opener available on the market, it is capable of an intensive opener (up to a degree of 95 %) and is expressly designed for the needs of new fibers and new process of natural, synthetic and artificial fibers, from 0.5 den to 30 den with a length of 25 mm to 90 mm. The machine has 3 opening cylinders all covered with rigid wires, 2 doffing cylinders (covered with rigid wires) that clear the opening cylinders from the fibers not yet opened and put them back in the feeding area, to allow them to be re-opened again. Finally a delivery cylinder, covered...

Emulsion Applicator Edge Trim Opener The Emulsion Applicator in the pipe allows to apply chemical additives to the fibers. The chemical additive is usually a blend of different oils (oleine, antistatic, etc.) and water, shacked in the emulsion device. According to the type of edge trim and side waste the configuration of the Edge Trim Opener can be modified. The drum can be covered with plywood lags with hardened steel pins or rigid wire, and the number of workers can vary. The machine can be supplied with a feeding conveyor or for direct feeding from the top. In the wider width, it can be used...

AUTEFA Solutions Italy s.p.a. Str. Campagnè, 16 · 13900 Biella · Italy T: +39 015 8484111 · F: +39 015 8491880 www.autefa.com · [email protected]