One and Two Stage Regenerative Turbine Pumps
8Pages

AURORA 120B Series “APCO” ® ONE AND TWO STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.C

ONE AND TWO STAGE TURBINE TYPE PUMPS AURORA 120B Series “APCO” ® One and Two Stage Turbine Type Pumps Capacities to 50 G.P.M. Heads to 920 Ft. Temperatures to 275°F Field Proven Throughout the World. Apco regenerative turbine pumps are ideal for handling high head low flow requirements, liquids entrained with gases and vapors (up to 20%) and constant flows. You are assured of reliable pumping service because every Apco is tested to ensure consistent performance. Apco pumps are designed for those special applications where high head and low flow are required by the system. Boiler feed...

ONE AND TWO STAGE TURBINE TYPE PUMPS Pump Performance Increase System Reliability. The constant flow characteristics make the Apco ideal for cooling systems where it is vital that sufficient flow is maintained to dissipate heat despite changes in pressure. Pressure variations occur for a number of reasons. The most common designed-in variations are caused by automatic pop-off valves and similar control devices. With Apco pumps, you can always depend on the same capacity despite variations in head pressure and achieve increased system reliability. The Apco pump line has the highest...

ONE AND TWO STAGE TURBINE TYPE PUMPS Pump Features Seal Cover Short Bearing Span Mechanical Seals External Water Seal Connection Top Vertical Discharge Is Self Venting Water Slinger Large Stainless Steel Shaft for Minimum Deflections and Corrosion Resistance Packing Cover Double Suction Impeller (Bronze) Minimizes Axial Thrust Regreaseable Ball Bearings Typical Two-Stage Unit Shown • Hydraulically balanced bronze impeller • 316 stainless steel or Monel™ shaft • Right- or left-hand rotation • External sealing line to stuffing box • Regreaseable ball bearings • Lantern ring • Short bearing...

ONE AND TWO STAGE TURBINE TYPE PUMPS Notes: 1. Dimensions and weights are approximate. 2. All dimensions are in inches and may vary ±1/8". 3. Frame sizes and motor weight are for open drip proof motors only. 4. Conduit box is shown in approximate position. Dimensions are not specified as they vary with each motor manufacturer. 5. Not for construction purposes unless certified. * May vary with motor manufacturer. Maximum Differential Pressure psi 300

ONE AND TWO STAGE TURBINE TYPE PUMPS Selection Charts Capacity GPM

ONE AND TWO STAGE TURBINE TYPE PUMPS Engineering Specifications Design Details Area Stuffing Box Shaft Ball Bearings Dimensions Packing rings per box Packing size (square) Outside diameter of shaft Inboard radial Outboard thrust Description Retainer Bearing Covers Casing Channel Rings Glands Impellers Packing Shaft Material of Construction Nylon Cast Iron — ASTM A48 Cast Iron — ASTM A48 Cast Iron — ASTM A48 Cast Iron — ASTM A48 Bronze — ASTM B62 Graphited Teflon® Fiber Stainless Steel — AISI 416 Limitations Description Maximum Hydrostatic Test Pressure Maximum Case Working Pressure Maximum...

Monel is a trademark of Special Metals Corporation. Teflon is a registered trademark and a brand name owned by DuPont. Aurora is a registered trademark of Pentair Ltd. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. A-02-1005 12/19/12 © 2012 Pentair Ltd. All Rights Reserved. 800 AIRPORT ROAD, NORTH AURORA, ILLINOIS 60542 WWW.AURORAPUMP.COM