A300/20 STATIC OVEN FOR DRYING (UP TO 300°C) Economical low temperature oven line is designed for thermal treatment such as drying, heating, thermal testing, aging and similar purposes in forced air-flow environment up to 300°C. Good technical parameters ensure to highquality results. These ovens can be used in scientific laboratories, educational institutions, medicine and industry. CONSTRUCTION • Inside casing in stainless steel/ mild steel • Perforated shelves, adjustable position • Outside casing in metal sheet, RAL7035 • Insulation rock wool • Door opening on the right, inner door in stainless/mild steel, silicon joint • Low electric power usage • Possibility to use a nitrogen gas • Chimney • U-Type heating element CONTROL: • Temperature measurement by thermocouple type “J” • PID electronic regulator, double digital display • Program of segments • SSR control unit TECHNICAL DATA: Volume Rated power not more than Rated supply voltage Rated frequency Number of phases - 1 Continuous operating temperature Maximum temperature Working chamber material Working chamber surroundings Airflow Shelves (number)/max. Maximum heating-up time (without charge) up to 300°C Temperature uniformity at 300°C Oven working chamber dimensions: width depth height Outside dimensions: width depth height Weight Buzzer Digital timer OTP (over temperature protection) PC connection and computer software AUREL S.p.A. Automation Division • Via Foro dei Tigli, 4 • 47015 MODIGLIANA (FC) • ITALY • Tel. +39.0546.941124 • Fax +39.0546.941660 www.aurel.it - www