Lever actuators for open-close and modulating duty SGF 05.1 – SGF 12.1 SGRF 05.1 – SGRF 12.1 SGFExC 05.1 – SGFExC 12.1 Torques from 100 Nm to 1,200 Nm Operating times for 90° from 4 s to 180 s Information

Lever actuators Applications Service conditions AUMA lever actuators offer the ideal automation solution when valves and butterfly valves in technical process plants can only be operated via lever arrangements due to lack of space or design features. Enclosure protection IP AUMA SGF lever actuators are available in special versions for open-close duty and for modulating duty. The explosion-proof version SGFExC is approved for open-close duty. Modular design AUMA lever actuators SGF are based on the part-turn actuator type range SG 05.1 – SG 12.1. Detailed information on the part-turn actuators...

[6] [7] [5] [8] [3] [4] [1] [6] [8] [5] [2] [7] [1] [4] [1] SG part-turn actuator as basic actuator for SGF lever actuators [2] End stops Internal end stops limit the swing angle. A significant advantage of the AUMA design is that only the comparatively low input torque acts on the end stops, not the high output torque. [3] Position indicator for indication of the valve position [4] Base made of spheroidal cast iron. With 4 holes for fastening bolts. [5] Handwheel For manual emergency operation and for operation during commissioning [6] Lever made of spheroidal cast iron, with two or three bores...

[1] Multi-turn actuators SA 07.1 – SA 48.1 Torques from 10 to 32,000 Nm Output speeds from 4 to 180 rpm [2] Multi-turn actuators SA/SAR with controls AUMATIC Torques from 10 to 1,000 Nm Output speeds from 4 to 180 rpm [3] Linear actuators SA/LE Combination of multi-turn actuator SA with linear thrust unit LE Thrusts from 4 kN to 217 kN Strokes up to 500 mm Linear speeds from 20 to 360 mm/min [4] Part-turn actuators SG 05.1 – SG 12.1 Torques from 100 to 1,200 Nm Operating times for 90° from 4 to 180 s [5] Part-turn actuators SA/GS Combination of multi-turn actuator SA with multi-turn gearbox GS...