Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. August Handel GmbH - CARFIT
  3. Underbody Protection Bitumen Spray

Underbody Protection Bitumen Spray

Underbody Protection Bitumen Spray
1 / 1 PageView full catalog

Underbody Protection Bitumen Spray

Product catalog summary
Description: This document details a high-quality bitumen spray designed for vehicle underbody protection, characterized by its black color and flexibility after drying.
Application: The spray is suitable for treating car and commercial vehicle bodies, providing excellent adhesion to metals and reliable corrosion protection.
Characteristics: The product remains flexible after drying, offers good resistance to weather effects, weak acids, and bases, and is sound-absorbing.
Substrates: It can be applied to various metal surfaces, primed metal parts, and fully cured old or OEM coatings.
Technical Data: The product is available in 500 ml aerosol cans, with six pieces per pack.
Application Procedure:
  • Shake thoroughly for at least 2 minutes before use.
  • Clean and degrease the surface with C.A.R.FIT Silicone Remover.
  • Remove old coatings and sand corrosion spots with grit P80 – P240.
  • Apply a few coats with a flash-off time of 3 – 5 minutes between layers.
  • Maintain a spraying distance of 25 cm and avoid chrome-plated surfaces.
  • Optimal application temperature is between 15 – 25°C.
  • Shake the spray can before applying each new coat.
  • After use, clean the nozzle by holding the can upside down and spraying briefly.
  • Maximum heat and fuel resistance is achieved after stoving at 160 – 200°C for approximately 30 minutes.
Storage: Store the pressurized container away from direct sunlight and do not exceed storage temperatures of 35°C. The product is dust dry in approximately 60 minutes at 20°C, with drying time dependent on environmental conditions and coating thickness.
See more

Catalog excerpts

Underbody Protection Bitumen Spray-1

C.A.R.F I TUnderbody Protection Bitumen Spray Underbody Protective Bitumen Spray DESCRIPTION High quality bitumen spray for vehicle underbody protection. For treatment of car and commercial vehicle bodies. • Remains flexible after drying • Excellent adhesion to metals • Good resistance to weather effects, weak acids and bases • Reliable corrosion protection SUBSTRATES Various metal surfaces, primed metal parts, fully cured old / OEM coatings. SUBSTRATE PRETREATMENT • Clean and degrease the surface with C.A.R.FIT Silicone Remover • Remove old coating and sand corrosion spots with grit P80 - P240 • Again clean and degrease the surface with C.A.R.FIT Silicone Remover and thoroughly dry it Shake thoroughly for at least 2 min Flash-off between layers: 3 - 5 min • Spraying distance: 25 cm • Do not apply on chrome-plated surfaces • Apply at room temperature. Optimal application temperature: 15 - 25°C • Shake the spray can once more before application of each new coat • After use, hold aerosol can upside down and spray briefly to clean the nozzle • Maximum heat-resistance and fuel-resistance is achieved after stoving at 160 - 200°C for ca. 30 min FURTHER TREATMENT Drying time depends on environment temperature, humidity and coating thickness TECHNICAL DATA This is a pressurized container, do not expose to direct sunlight or store above 35°C

 Open the catalog to page 1

All August Handel GmbH - CARFIT catalogs and technical brochures

  1. 2K HS Acryl Primer Filler 4:1
    2K HS Acryl Primer Filler 4:1

    1  Page

  2. Fillable Spray Can
    Fillable Spray Can

    1  Page

  3. Fade-out Thinner Spray
    Fade-out Thinner Spray

    1  Page

  4. Thermo Paint Spray 650°C
    Thermo Paint Spray 650°C

    1  Page

Archived catalogs

  1. Carbon Putty
    Carbon Putty

    1  Page

  2. 2K Epoxy Primer 1:1
    2K Epoxy Primer 1:1

    1  Page

  3. C.A.R.FIT Katalog
    C.A.R.FIT Katalog

    76  Pages

  4. Spray Putty
    Spray Putty

    1  Page

  5. 2K Ultra HS Clear Coat
    2K Ultra HS Clear Coat

    1  Page

  6. Fade-out Thinner Spray
    Fade-out Thinner Spray

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?
About Us