Fade-out Thinner SprayDESCRIPTION Fade-out thinner for blending of clear coats and 2K paints during spot repairs. The product is specially designed to ensure the overspray blending into the coat, leaving no visible difference between the old and new paintwork and reducing amount of polishing works. For small and spot repair in car refinishing. • Ideal coating for spot repair • Good dissolving ability • Forms easy to polish transition area • Considerably reduces amount of polishing works Metal and plastic parts, polyester putties, primers, fillers, fully cured old or fresh coatings. Shake thoroughly for at least 2 min Apply C.A.R.FIT 2K clear coat according to TDS Apply 1-3 coats of fade-out thinner immediately after application of 2K clear coat. Spraying distance: 25 cm Flash-off between layers: 20-30 sec It is recommended to apply C.A.R.FIT fade-out thinner within 10 cm distance inside and outside the edge areas FURTHER TREATMENT Dry the clear coat according to TDS Polish the transition area TECHNICAL DATA special resins transparent This is a pressurized container, do not expose to direct sunlight or store above 35°C