PRODUCT LEAFLET MARKLIGHT LED retro-reflective transformer light

Compliance Specifications ICAO Annex 14-Vol.1, IEC (61827), FAA (AC150/5345-39B) STAC certificate: 2009A001 The Augier’s MARKLIGHT led light is a revolutionary elevated marker light which has all requirements for taxiway and parking edge lighting. A four in one product in a single led light marker : Transformer light (connected to the AGL primary circuit) Auto-reflective marker Elevated led light (connected to the AGL isolating transformer secondary circuit) Portable work area marker light (on a metallic brace) This light has a simple design and a low consumption (<10VA), it cannot be disassembled...

MARKLIGHT® : Presentation GENERAL PRESENTATION The MARKLIGHT light fixture is peculiar because it cannot be disassembled : the optical part and body are watertight. To achieve that performance, the whole electronic part including the LED lighting system is cast with a polyurethane resin base. This structure gives a high resistance to vibrations, choc, as well as against chemical fluids and agents that can be encountered on airport taxiways. Retro-reflective function : The moulded body of the marker is fit with a 250mm high retro-reflective sleeve which answers all requirements of the ICAO (Annex...

MARKLIGHT® : Presentation Mounting Stake Portable Brace Augier’s MARKLIGHT marker can be supplied with a full mounting kit, including either a stake or a concrete peg. These equipments are connected to the body using a frangible coupling which will be screwed on the chosen mounting device (14mm GAZ or 2” thread). 2nd Standard Airport Base

MARKLIGHT® : Technical Characteristics LED Light : Weight : 2.5 Kg. Above the ground dimension : H 340 mm x D 77 mm. Coulour : blue or red Nominal current : 6.6 Amps. Input current : from 1.5 to 6.6 Amps. Power consumption : less than 8 VA. Light intensity : taxiway edge blue: > 2 cd from 0° up to 6° vertical, > 0.2 cd from 6° up to 90° vertical. work area marker red: > 10 cd from 0° up to 10° vertical, > 5 cd above 10° vertical. VFR runway end red: > 3 cd from 2° up to 10° vertical (average 5cd), > 1 cd above 10° vertical. Temperature : -55°C to +55°C Lifespan : more than 50 000 Hrs. IP 68....

MARKLIGHT® : Technical Characteristics OPTIONS Connection choice : Primary connection : 2 FAA primary plug and receptacle lead ST2 and ST9 (L 0.5 m). Secondary connection : 1 FAA secondary plug ST1 (L 0.5 m). Bare cables. ST6 plug with 2 single core wires (L 10cm) Mounting : Stake Concrete peg Tripod base (to be posed). Tripod stand (to be screwed). (14mmGAZ or 2”) Photometric characteristics :

MARKLIGHT® : LED Retro-reflective Transformer Light ORDERING INFORMATION The MARKLIGHT is defined using an ordering code. That code will describe particularities and options. Example : TFR-700-B10-01-20 = blue marker for taxiway edge with retro-reflective sleeve, using primary connection, on concrete mounting peg and frangible coupling : TFR : Retro-reflective LED transformer light Optical Options Connection Options Mounting Options 0X : Without mounting X0 : With breakable coupling 1X : With mounting stake (14mm gaz) XS : Without breakable coupling 2X : With concrete peg (14mm gaz) 3X : With...

A WORLD OF ENERGY UNDER CONTROL UN MONDE D'ENERGIE MAITRISEE