Marklight work area marking
8Pages

PRODUCT LEAFLET MARKLIGHT LED retro-reflective transformer light Temporary - Work area marking version

Compliance Specifications ICAO Annex 14-Vol.1, IEC (61827) The Augier’s MARKLIGHT led light is a revolutionary elevated marker light which has all requirements for work area or temporary lighting. A four in one product in a single led marker light: Transformer light (connected to the AGL primary circuit) Auto-reflective marker Elevated led light (connected to the AGL isolating transformer secondary circuit) Portable work area marker light (on a metallic brace) This light has a simple design and a low consumption (<10VA), it cannot be disassembled: so it is extremely robust, reliable and...

MARKLIGHT® : Presentation GENERAL PRESENTATION On airport platform, and especially on taxiways, work area can be troublesome to ground movements, and must be clearly identified by pilots. Temporary lighting will be put in place, and will stay in operation for the duration of the on going work (from 1 week to several months). Three systems are commonly used: 1. Stand alone portable marker : This stand alone lights do not meet semi-permanent installation (>2 or 3 days), and are quite expensive (buying costs + battery maintenance) 2. Work area markers 220V: Markers using 220V power supply...

MARKLIGHT® : Presentation The MARKLIGHT® can be stringed easily, the temporary lighting loop being connected to the nearest lighting circuit available by mean of a single standard isolating transformer. A 100W transformer can feed up to 15 Marklight®. The lighting loop can be closed either using a Marklight® fitted with a single lead, or by mean of a termination plug. Retro reflective function: The moulded body of the light is fitted with a retro reflective sleeve, which height is 250mm, meeting ICAO (Annex 14, Vol.1, chapter 5.5.5 and annex 1), FAA (AC150/5345-39B) and BS (CAP168)...

MARKLIGHT® : Technical Characteristics LED Light: Weight 2.5 kg Above the ground dimensions: H 340 mm x D 77 mm Colour : blue or red Nominal current: 6.6A Input current: from 1.5 to 6.6 Amps. Power consumption: less than 8 VA. Light intensity: taxiway edge blue: > 2 cd from 0° up to 6° vertical, > 0.2 cd from 6° up to 90° vertical. Work area marker red: > 10 cd from 0° up to 10° vertical, > 5 cd above 10° vertical. VFR runway end red: > 3 cd from 2° up to 10° vertical (average 5cd), > 1 cd above 10° vertical. Temperature : -55°C to +55°C Lifespan: more than 50 000 Hrs. IP 68...

MARKLIGHT® : Technical Characteristics OPTIONS Connection choice: Primary connection: 2 FAA primary plug and receptacle lead ST2 and ST9 (L 0.5 m). Secondary connection: 1 FAA secondary plug ST1 (L 0.5 m). Bare cables. ST6 plug with 2 single core wires (L 10cm) Mounting: Stake Concrete peg Tripod base (to be posed). Tripod stand (to be screwed). (14mmGAZ or 2”)

MARKLIGHT® : LED retro-reflective transformer light ORDERING INFORMATION The MARKLIGHT is defined using an ordering code. That code will describe particularities and options. Example: TFR-700-B10-01-20 = blue marker for taxiway edge with retro-reflective sleeve, using primary connection, on concrete mounting peg and frangible coupling : TFR : Retro-reflective LED transformer light Optical Options Connection Options Mounting Options 0X : Without mounting X0 : With breakable coupling 1X : With mounting stake (14mm gaz) XS : Without breakable coupling 2X : With concrete peg (14mm gaz) 3X :...

A WORLD OF ENERGY UNDER CONTROL UN MONDE D'ENERGIE MAITRISEE