PRODUCT LEAFLET DIAM 3100 Compact Single-phase Constant Current Regulator

Compliance Standards ICAO Aerodrome design manual, part 5 FAA (AC150/5345-10G – L828 & L829) IEC (61822) Applications DIAM3100 series CCRs are compact and stackable fully static devices controlled by two thyristors. They are designed to maintain a constant, pre-displayed and adjustable output current independently of load or power supply fluctuations. These devices are specifically designed for airfield lighting on runways, taxiways or aprons. They meet FAA and IEC standards. Electronics, using the latest digital technology, can be controlled and monitored by mean of serial networks with or without...

DIAM 3100 : Technical Characteristics GENERAL PRESENTATION Each DIAM3100 is delivered into a zinc coated metal frame with lifting rings. It includes 3 distinct parts: an "electronic" compartment, a “Low voltage” compartment and a "high voltage" compartment. The Electronic part includes an electronic board whose design uses latest digital technology; it is mounted on the front panel of the device. This front door supports the user interface delivering any useful information, and allowing all local or remote operations. Internal parts are accessible from the front or the top. The Low voltage compartment...

DIAM 3100 : Technical Characteristics ELECTRICAL FEATURES Supply: Single-phase 220V, 230V, 240V –5/+10% (FAA) +/-10% (IEC), Frequency 50/60. Rated output current : 6.6 Output power : 2.5kW, 4kW, 5kW, 6.5kW Power factor : > 90% at nominal voltage and rated resistive load. Efficiency : > 90% at rated parameters. Output current accuracy : Better than ±1% under the following conditions : Power supply voltage: –5/+10% (FAA) or +/-10% (IEC) - Frequency: ± 5%, and Load: from 0 to 100%. Remote control : Voltage, from 20V to 60V DC, or dry contacts, or serial network. Back indication: Compliant with L828...

DIAM 3100 : Display and Menus USER INTERFACE Made up of a flat polyester keypad on the front plate, it includes a wide display of 16 x 140 p. With screen saver, showing preferably on the upper line the installation state, warnings and parameters, and on the lower line the 4 keys definition, depending of the present menu DISPLAY FUNCTIONALITY The display shows 2 lines of text allowing to monitor many parameters, values and warnings. The lower line sets the definition of the keypad. The preferred information displayed can be changed in “STOP” mode, and can be chosen (long press on STOP) among the...

DIAM 3100 : Display and Menus MONITORING Parameters can be seen scrolling through the top-level menu items using the ← and → keys: CONFIGURATION MENU The “Configuration” menu allows to set all basic parameters of the CCR to the processor (in case of mother board replacement, for example) : Rated input voltage, from 220 to 240 Vac Rated power, in kVA, Frequency, in Hz: 50 or 60 Brightness number, from 1 to 8. OPTION MENU The “Option” menu allows the following definitions: Parameter access: No A change from No to Yes allows to change all parameters of the DIAM3100, in order to avoid wrong operations....

Constant Current Regulator - DIAM 3100 ORDERING INFORMATION The DIAM3100 regulator is identified by a serialized ordering code which indicates its type and particularity. If needed, add all useful precision and options Example : D31-IEC-1-5-60-06-240-04-060 = DIAM3100 compliant to IEC 61822, 6.6A, 5 brightness, 60Hz, 6.5KW, 240Vac, ETHERNET remote control, Time meters and LFD. 828 : L-828 FAA Type (options as described in L828 advisory are included) 829 : L-829 FAA Type (options as described in L829 advisory are included) IEC : 61822 type 1 : Class 1 (ouptut current 6.6A) 3 : Style 1 (Class 1...

A WORLD OF ENERGY UNDER CONTROL UN MONDE D'ENERGIE MAITRISEE