manual bag sealer
3Pages

The Magneta series consists of a com-plete range of manually operated impulse sealers with different sizedmodels and options. This user friendlyand safe machine is ideal for packing small and medium sized series. Themachine can work with pre-made bags as well as with tubular foil. Whenworking with tubular foil, the machinecan produce various length bags byusing the integrated shielded cutting device.The sealing cycle of the machine caneasily be started by pushing down theseal bar by hand or by using a footpedal. Once started the magnetic bars remain closed throughout the sealing and cooling cycle and then automati-cally open, ready to make the nextseal. The machine is suitable for seal- ing polyethylene, polypropylene, PVCand thin laminates and the sealing andcooling times are adjustable. MAGNETA MGT - Twin seal MAGNETA MGS - Stainless steel The twin seal model of the Magneta is equipped with two parallel sealing bars. The cutting device will cut thefilm in between the two sealing bars.On all models except the 300 the second seal bar can be switched offallowing the machine to be used as astandard Magneta. The MGS model of the Magneta is made out of stainless steel for special applications like the food industry orfor clinical environments. The MGS hasa stainless steel housing and acces- sories. All the other characteristics areidentical to the standard model. Theoptions like the support table and the support are also available in stainlesssteel. MAGNETA MGDS - Bi-active The bi-active model of the Magneta is equipped with two sealing bars, one in the arm and one in the machine. Thiscreates a more powerful seal than thestandard model and is capable of seal- ing thick films up to 2x 0.25 mm. MAGNETA MGM - Motor The Magneta MGM is Audions latestdevelopment in the Magneta series, which has conquered the marketsuccessfully. The Magneta MGM sealeris powered by an electrical motor and equipped with an electrical footswitch. This special system enables you to close the sealing jaws with a gentle push on the pedal and achievesconsistent and reliable seals. Almost all Magneta models can be supplied as MGM version and the Magnetaoptions also apply to the MGMmodels. MAGNETA MGI - Industrial seal The MGI model of the Magneta is equipped with a 5 mm wide seal instead of the standard 3 mm wideseal. On this model the sealing wire isfastened with tensioners to prevent distortion. > Magneta series

IMPULSE SEALERS 7 > MAGNETA range Standard300 MG421 MG621 MG820 MG1020 MGtwin seals300 MGT421 MGT621 MGT820 MGT1020 MGT stainless steel300 MGS421 MGS621 MGS-- industrial seal300 MGI----stainless steel + twin seals-421 MGST621 MGST--motor300 MGM421 MGM621 MGM820 MGM1020 MGMmotor + industrial seal-421 MGMI621 MGMI-- motor + twin seals-421 MGMT621 MGMT820 MGMT1020 MGMT motor + stainless steel-421 MGMS621 MGMS-- motor + stainless steel + industrial seal-421 MGMIS--- motor + bi-active seals + industrial seal -421 MGMDS621 MGMDS-- motor + twin seals + industrial seal-421 MGMIT621 MGMIT-- MGDS -...