ATX COAXIAL PROBE V2.0
8Pages

UNIVERSAL PROBES ATX COAXIAL PROBE V2.0

Installation in hold-down plate Imprint Publisher: ATX Hardware GmbH West Am Wiesengrund 12 86932 Pürgen/Germany Phone +49 8196 9304-0 Telefax + 49 8196 9304-19 E-Mail: projekte@atx-hardware.de Website: www.atx-hardware.de

THE NEW UNIVERSAL PROBE For capacitive measurements on ICT test systems Increase the reliability of your ICT fixtures with our latest innovation. The ATX coaxial probe V2.0 has been developed to provide you with a significantly more stable and reliable probe. Thanks to the improved mechanical stability of the probe, you can significantly increase the reliability and robustness of your production processes. Our probes are secured against twisting and have an individually adjustable height suspension. The use of plug-in probe plates makes replacing the probes effortless and time-saving. This...

ATX COAXIAL PROBE V2.0 PROBE ASSEMBLY Main components Each probe consists of the following two main components: a Basic unit: The ATX coaxial probe V2.0 is available in three different lengths. The base body is mounted in the hold-down or pin carrier plate using a sleeve, allowing flexible height compensation and precise alignment of the probe. a Probe plates: Available in three different sizes. It is also possible to customise the probe plates to your respective component dimensions. The following components can be added to our probes for specific test systems and universally customised: a...

MULTICOMPATIBLE DISCOVER THE VERSATILITY OF OUR ATX COAXIAL PROBE V2.0 Individual. Compatible. Simple. MUXBOARD Order number Keysight NanoVTEP Signal Conditioner Card N4333B-002 AMPLIFIER WITH SSMCX SOCKET Order number Keysight amplifier NanoVTEP V2.0 Teradyne amplifier Framescan FX2 V2.0 Digitaltest OpensCheck Buffer V2.0 SPEA Escan amplifier V2.0 BASIC UNIT (consisting of probe cable, plug connection and probe holder) Order number ATX coaxial probe V2.0 short L=37mm drawing no. B14-00033 ATX coaxial probe V2.0 medium L=52mm drawing no. B14-00035 ATX coaxial probe V2.0 long L=64mm drawing...

INSTALLATION SET TOOL Application The basic unit is mounted in the hold-down or pin plate using a sleeve. To do this, drill a hole in the hold-down or pin plate and then insert the sleeve of the probe using the set tool. This enables flexible height compensation and ensures precise alignment. Sleeve protrusion The sleeve must protrude by at least 3 mm. SET TOOL Order number INSTALLATION DIMENSIONS Installation Basic unit without probe cable

INSTALLATION IN HOLD-DOWN PLATE INSTALLATION DRAWING Installation from above Baisc unit (without probe cable) 37, 52 or 64mm + Probe plate 1,2mm Hold-down plate Moving plate INSTALLATION IN PIN PLATE INSTALLATION DRAWING Installation from below Pin plate Basic unit (without probe cable) 37, 52 or 64mm + Probe plate 1,2mm

ATX HARDWARE GMBH WEST Location Pürgen | Am Wiesengrund 12 | 86932 Pürgen Location Weil im Schönbuch | Carl-Zeiss-Straße 5/1 | 71093 Weil im Schönbuch Subject to change without notice · Printed in Germany · Info No. 01/082024