STEAM BOILER GE ELECTRIC www.attsu.com | page 1 |

GE Series: electric steam generator which combines the advantages of the steam produced in large boilers with the cleanliness and small size of electric units. Suitable for small consumptions Heating by encapsulated and submerged lowcharge ohmic resistors. Steam rates from 23 Kg/h (15 kW) to 4.600 Kg/h (3.300 kW). GE-250 It's main advantages are: Thanks to the experience gained over more than 60 years as well as to the continued research and development, the GE boiler, as a consequence of its insulation of great thickness and high density has extremely low radiation losses. Optimum accessibility...

The boiler is perfectly thermally insulated with a layer of mineral wool and coated in pained mild steel or stainless steel sheet to minimize radiation losses. Scaling of power outputs from 1 to 10 or more stages makes the GE boiler flexible and modulating source of steam supply. The body and heads assembly is done with electrically welded joints, according to approved procedure. Quality control nondestructive examination of welding according to the design code requirements.

Upon request, the GE boiler can be supplied with an ATTSUTROL electric control cabinet with built in automation. Twenty-four or seventy-two hour operation without permanent supervision according to TRD-604. GE boiler, thanks to its single startup control, impact indicators, automatic locking against improper operation and a panel labeled with summarized maintenance instructions makes it very reliable and comprehensible to the boiler operator. Stainless steel BFW pump, level gauge and valves with appropriate quality according to the operating conditions. Boiler design and construction follow the...

GE-4600 – HEATING RESISTANCES CONNECTION (3 MW ELECTRIC POWER RATE) RESISTANCES ASSEMBLY USING A HYDRAULIC TORQUE WRENCH

GE-2400 WITH SUPERHEATER – IN THE PROCESS OF MANUFACTURE

installation diagram