Outdoor
6Pages

OUTDOOR CASES

GENERAL CHARACTERISTICS The ATOS case in the OUTDOOR range is designed specifically to withstand the most severe environmental requirements. The case provides full protection against very bad weather (rain and snow) through its high IP55 sealing level and its machined diamond-shaped roof. The cases are available in single or double skin versions. The double skin technology protects against the sun's rays and allows the outside walls to be changed around in the event of vandalism or an accident. An optional ventilation kit is available to limit temperature rises in the case if the equipment...

The case comprises an outside aluminium structure painted with RAL 7035. It is fitted with reinforced crosspieces in galvanised steel. These support the four 19" inside uprights (adjustable to 25 mm intervals) and also ensure the rigidity of the case when being lifted or fixed to the ground in the event of shocks or vibrations. Permitted load: 300 kg. • ibration-tested as per standard EN 60068-2-6 V (0.5 mm from 5 to 22Hz, 0.5g from 22 to 150Hz). • Shock-tested as per standard EN 60068-2-27 (10g11ms vertical). The roof has diamond-shaped machining to allow for water runoff, with over-roof...

Note: Clarifications on the dimensions indicated in the table below: ■ Height overall = Outside case height without eyebolts or plinth ■ Working height = the area available for 19'' equipment plug-ins. • Upright height = the working height of the 19" inside upright. The first units (1U) at the top and bottom of the upright cannot be used for plug-in equipment but remain available for 19” panels.

PLINTHS Stainless steel 304L plinth with pure, smooth polyester paint RAL 7035. Two versions are on offer: ■ "Open” version with two stringers placed sideways below the case ■ "Closed” version comprising a belt with tamperproof closing plates (front and rear). Plinth height: 150 mm. EYEBOLTS Ref. 4001320 Kit comprising four eyebolts M10 x 28. Extremely strong (Max. working load 700 kg). DOOR CONTACT SWITCH Ref. 4001305 For open/closed door contact, automatic lighting or alarm sent to supervision unit. ■ 1 position switch ("O+C" bipolar snap-action contact). ■ 1 connection cable. ■ 1 fixing...

■ AIR OUTLET FILTER Ref. 4001327 Filter G4 to be fitted on rear door for natural convection in the event of very low heat dissipation. To keep the case frost-free or prevent condensation. Elements fitted with fans for better convection. Are fixed directly to the 19" inside uprights. Fitted with a 3 x 1 mm2 cord, 2 m long with plug. Requires circuit breaker for protection. ■ THERMOSTATS Are fixed to inside uprights. ■ 1 DIN rail. ■ thermostat + terminals for supply. Element control thermostat Ref. 6000389 (A) High temperature warning thermostat Ref. 6000391 (B) Low temperature warning...