CABINETS, CONSOLES, CASES, SUBRACKS SEVERE ENVIRONMENT FOR STATIONARY AND EMBEDDED APPLICATIONS The Art of enclosing electronics

et à son outil industriel ffrant des réponses à tous les performant. besoins d'habillage de l'industrie électronique, ATOS adapte ses produits pour ffrant des réponses à tous les apporter une solution à chaquebesoins d'habillage de l'industrie contexte : indoor/outdoor, and manufactures in France, at its factories at Glos (Normandy) and Carros (Côte designs, develops standard/standard ATOS adapte ses produits pour électronique, adapté, d'Azur), casing equipment for the electronics industry:ventilé/clima- à chaque contexte : metal equipment, etc. spécifique/production surapporter une solutionracks,...

SPECIAL PRODUCTS

CONVERGENC SERVERS AND COMPUTERS CONVERGENCE CABINET VERSIONS: TRIMS: Specially designed for Server and Computer applications. ► Very deep cabinet: 800, 1000 and 1200 mm ► High payload: 900 kg static and on castors ► Large dissipation rating ► Inside uprights adjustable constantly. ► Bolted (removable) MV ► Welded MS. ► Reinforced welded MSR. ► Door perforated 81% for airflow, single- or double-leaf version, ► One-piece side panels or in two parts. ► Roofs with wide cable management cut-outs. EQUIPMENT: ► Inside uprights adjustable constantly and/or to 25 mm pitch. ► Side assembly of PDU in Zero...

Standard EGRALE rangeSEVERE ENVIRONMENT STURDINESS Two INTEGRALE versions are on offer - bolted or welded - and both can accommodate high equipment loads: ► 800 kg static for the bolted version. ► 800 kg in transport mode and when subject to shocks and vibrations for the welded version. ► A reinforced version is available for Marine or Rail embedded applications subject to severe loading. See next pages. Specific catalogue upon request INTEGRALE protects built-in equipment from the environment at a variety of levels. ► Water- and dust-tight IP55 as per standard EN 60529. ► Electromagnetic shielding...

Standard components ® Structure ® Door © Reduced door ® Side panel ® Rear panel © Rear panel with cut-outs ® "Guillotine" plate ® "Wave" plate ® Blanking plate ® Desk ® Power unit ® Ventilation unit ® Cable I/O plate ® Ventilation dome ® Raised roof ® Wire rope shock absorbers ® Double ring structure COMPLIANT WITH STANDARDS IEC 297 Dimensions CEA 310-E Dimensions EN 60950-1 Safety IT 8850 DCNS guide MIL STD 810 Environment Double ring version: The double ring structure facilitates integration in reduced environments or with complex access.

A rating plate summarises the characteristics of each product A few explanations: MARKERS Construction: Suspension: Wire rope shock absorbers One-piece rack Sealing: Behaviour:  Certain applications require a cabinet rack with 2 rings, assembled on board or as kit.  Dry, on resilient pads, Elastomeric mounts or cable shock-absorbers.  SE: expressed in kg "static equivalent", this involves the product of the payload in the cabinet multiplied by the number of residual G supplied by the suspension on shock absorbers. Example: load 300 kg under 15G11ms ATTENUATION BAIE DEFENSE TYPE HF COTE DROIT...

EMBEDDED APPLICATION Zinc-plated welded steel one-piece Zinc-plated welded steel one-piece Wire rope shock absorbers Wire rope shock absorbers Usual dimensions Width: Depth: Heights: Usual dimensions Width: Depth: Heights: Product qualified: By design analogy Product qualified: By finite element calculation General, surface vessel General, surface vessel 19” INTÉGRALE cabinet COMSAT SERIES IPMAR SERIES 19” cabinet AND CASE Standard 19” ruggedised INTEGRALE cabinet with ventilation via dome and air intake filter on cabinet bottom with honeycomb. Standard 19” ruggedised INTEGRALE cabinet with ventilation...

EMBEDDED APPLICATION Construction: Welded stainless one-piece Suspension: Wire rope shock absorbers Behaviour: Non-magnetic or magnetic Product qualified: By finite element calculation Applications: Mine hunter cabinet or Suspension: Wire rope shock absorbers Behaviour: Magnetic ASSEMBLED cabinets IN 19” CONSOLE SR INTEGRALE cabinet (Reduced Structure) to 19” standard: • Narrow uprights for a reduced cabinet width of 560 mm and top and bottom crossbars of 22 mm. • Ventilation: Air intake by the door or the front face, top rear outlet. • Extractable ventilation plug-in unit. •...

EMBEDDED APPLICATION MARKERS Construction: 2 rings, stainless steel Elastomeric mounts Sealing: Behaviour: Usual dimensions Width: Depth: Heights: Product qualified: By finite element calculation PCT 2 RINGS cabinet Stainless steel cabinet, reduced width (550 mm) and in two rings for submarine renovation applications, without huge need for sealing. Characteristics Welded structure in stainless steel 304L: • Welded front ring, incorporating the 19” fixings on cage nuts (setback 15 mm from front) and runner fixings in hexagonal crimp nuts. • ear ring incorporating the brass cable inlet/outlet plates...

EMBEDDED APPLICATION MARINE CABINETS 19” I Construction: 1 ring, one-piece Suspension: Wire rope shock absorbers Behaviour: Magnetic Behaviour: Magnetic Heights: 17 or 33 U + front panel Product qualified: by calculation and tests Product qualified: by calculation and tests Applications: General, surface vessel Applications: General, surface vessel MARINE 1 RING cabinet MARINE 2 RINGS cabinet Cabinet for critical applications (weapons systems, missiles) highly secure. • Ventilation system IP55, • HF EMC shielding at more than 50 dB attenuation from 30 MHz to 1...

EMBEDDED APPLICATION MARINE CABINETSW.635 Construction: 1 or 2 rings, stainless steel Suspension: Wire rope shock absorbers Behaviour: Non-magnetic Depth: 430 (1 ring) or 745 (2 ring) mm Heights: 1220 (3 levels) or 1700 (4 levels) mm Product qualified: by finite element calculation Applications: Surface vessel, submarine The 19” swing frame cabinets have been designed for applications with shallow racks capable of being housed in a swivel frame and requiring easy access to the rear wiring. • In 1 or 2 rings depending on the desired depth, • Design per level: 1 level = 1 6U...