Digital Back-of-Module Temperature MeasurementPt1000 3-Wire RTD with Modbus RTU Temperature Digitizer and TransmitterBack-of-Module RTD 3-wire Pt1000 Peel and Stick Adhesive MT2 Digitizer & Transmitter Modbus RTU on RS485 Features • Easy and accurate back-of-module temperature measurements • Temperature measured with IEC 60751 Class A Pt1000 3-wire RTD • Simple RTD installation on back of module using peel-and-stick selfadhesive layer • Small RTD probe size compatible with IEC 61724-1 for bifacial rear-side use • Compact RTD digitizer and temperature transmitter electronics in IP67 aluminum weatherproof enclosure

Specifications Main Data Measurement range Input voltage Input power Sensor Sensing element Accuracy Stability Probe Cable Connector Cable Length Adhesive Type Thermal Conductivity Retention Force Weather Resistance Communication Protocol Address Electronics Dimensions Ingress protection Standards -40 to 100 °C 10-30 VDC <5 mA typical 1000-ohm 3-wire Pt1000 RTD IEC 60751 Class A, ± (0.15 + 0.002t) IEC 60751 Class A Anodized aluminum disc, 1.0 in (25 mm) diameter M8 connector 3 m standard length 3M VHB 9473PC 0.16 W/m-K > 9.8 N/cm Water, UV Modbus RTU over RS485 User-settable 3.5 in x 1.8 in x...