TECHNICAL SHEET N°1 Please, refer to sheet n°2 about the ATEX (gas & dust) – ATEX Certified LEVEL DETECTOR FOR SOLIDS For high level detections ATEX Marking code - CE 0081 SIZE Height: 200 mm – Diameter: 92 mm DIFFERENTIAL ANGLE Please, refer to the connection diagram enclosed to each float delivered. APPLIANCES This device has a double housing and is especially suitable for use in explosive areas. It has been designed for the solids level detections (cereals, granulars, pulverulents). Placed vertically, it is recommended to stop the filling of silos and storage zones. It is ATEX certified for use in areas classified 0, 1, 2 (gas) and 20, 21, 22 (dust) TECHNICAL CHARACTERISTICS By tilting To stop the filling of silos (cereals, pulverulents) Important specification Epecially for use in EXPLOSIVE areas 0, 1, 2 Maximum temperature Protection index Electric characteristics Obligatory connection With intrinsic safety relay Gold plated contacts Biconical / Cylindrical shell (2) Copolymer polypropylene + HR HY (hypalon) Câble type Float weight without cable Cable weight Adjustable ballast on cable (option) Standard cable length (series) 5, 10, 15, 20, 25 and 30 m (other lengths on request) ATMI – Z.A. de l’Observatoire – 2 avenue des Bosquets – 78180 Montigny le Bretonneux – France Tél: +33 (0)1 61 37 35 60 Fax: +33 (0)1 61 37 35 69 Site Internet: www.atmi.fr E-Mail: [email protected] Operation mode

TECHNICAL SHEET N°2 Complement to sheet n°1 about ATEX (gas & dust) – ATEX Certified LEVEL DETECTOR FOR SOLIDS For high level detections ATEX Marking code - CE 0081 ATEX CERTIFICATION – WHAT YOU SHOULD KNOW It is important to know that the level regulation devices certified ATEX are compulsory in the main pumping stations, granular silos and some pulverulent materials storage facilities. It is also important to know that only the user can define, before the installation, if it deals or not with a pumping station or a silo with explosive risks. The atmosphere is classified 0, 1, 2 for gas and...