TECHNICAL SHEET ATS 165 FLOAT LEVEL SWITCH For automatic regulation with one single device USE VR – Emptying / Filling WIRING SIZE Height: 152 mm – Diameter: 95 mm DIFFERENTIAL ANGLE Please, refer to the connection diagram enclosed to each float delivered. APPLIANCES Exceptional float with a 165° working differential angle which totally eliminates jerks on the pumps motors, even in very rough liquids. Moreover, the ATS 165 enables an automatic level regulation of any pump with one single float, replacing two standard regulators. This device is able to perform a regulation with a differential angle of about 1m50 between the high and low levels. TECHNICAL CHARACTERISTICS Omnidirectional Allowed fluid density Maximum pressure Maximum temperature Protection index Electric characteristics Cut-out power Silver / nickel reverser contacts Biconical shell Copolymer polypropylene Cable type Float weight without cable Cable weight Adjustable ballast on cable (option) Standard cable length (series) 5, 10, 15, 20 and 25 m (other lengths on request) ATMI – Z.A. de l’Observatoire – 2 avenue des Bosquets – 78180 Montigny le Bretonneux – France Tél: +33 (0)1 61 37 35 60 Fax: +33 (0)1 61 37 35 69 Site Internet: www.atmi.fr E-Mail: [email protected] Operation mode