Atlas Copco Air Line Accessories
67Pages

Atlas Copco Air Line Accessories

Energy Efficiency Audits offer sustainable energy savings For an Energy Efficiency Audit of your air distribution system, Atlas Copco employs its own Energy Efficiency Calculator to recommend a correct air line installation. This will result in higher productivity with lower energy consumption and a sustainable reduction in energy costs – and the benefits don’t end there. Pressure check and visual inspection A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco...

Introduction – Air Line Accessories Ensure that your tools achieve their full potential To ensure that you benefit from the full potential power of your tools, Atlas Copco has developed a full range of air line accessories for use with Atlas Copco tools and air motors. All accessories can be used for other applications and pneumatic equipment. Productivity By using Atlas Copco’s air line accessories you ensure that you have a correct air line installation for your tool. This will provide the correct air flow to the tool, ensuring that you benefit from its full potential power, and that you...

All local safety regulations with respect to installation, operation and overhaul must always be followed. Please read the separate instructions regarding safety which are supplied with all products in order to improve your own safety! Ball valve l Switch off the compressed air with the ball valve when you are not working (see fig. 1). Open all ball valves gently in order to discover improperly tightened devices (see fig. 5). Air preparation units l Please check for solvents which change the structure of polycarbonatea bowls. These solvents make the polycarbonate brittle so it can break....

Introduction – Air Preparation Units Get maximum productivity from your tools Atlas Copco air preparation units are designed to help you get maximum productivity from your tools. They ensure minimal pressure drop and thus minimum energy losses in the air distribution system, benefiting the environment and cutting your operating costs. The lifetimes of your tools will be extended by using air preparation units and with that comes lower repair costs and less downtime. A correct air installation ensures productivity and good total economy. Filter – FIL Water and dirt in your compressed air...

Air preparation unit MINI-K's main application is to prepare the air for pneumatic components. MINI-K units have a 1/4" BSP connection thread, a composite housing made of polyamide 66 and the bowls are made of polycarbonate. Working temperature 0ºC to +50ºC at 10 bar Operating pressure Inlet pressure 0-10 bar Outlet pressure 0.5-8 bar Standard filter 30 µm Pressure gauge 1/8" BSP Filter condensate drainage Max condensate Max oil capacity capacity Weight cm3 cm3 kg NOTE: Economical air flow: 8 bar inlet pressure, 6.3 bar outlet pressure, 0.2 bar pressure drop. Maximum air flow: 10 bar inlet...

Air preparation unit MINI-B's main application is to prepare the air for pneumatic components and tools with low air consumption. MINI-B has a 1/4" BSP connection thread and the housing is made of diecast zinc. The bowls are made of polycarbonate or the unit has metal bowls in zinc. Working temperature 0ºC to +50ºC at 10 bar Operating pressure Inlet pressure 0-16 bar Outlet pressure 0.5-8 bar Standard filter 30 µm Pressure gauge 1/8" BSP Filter condensate drainage Polycarbonate Polycarbonate Metal Semi/automatic Manual Manual Polycarbonate Metal Polycarbonate Polycarbonate Semi/automatic...

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 1/2" BSP connection thread and a housing and bowl of high-tech polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. MIDI Optimizer self-regulating nanolubricator Adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes...

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4" BSP connection thread and a housing and bowl of high-tech polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. MIDI Optimizer self-regulating nanolubricator Adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes...

The high flow MAXI-B air preparation unit's main application is to prepare the air for pneumatic tools which are large air consumers when long distribution hoses and multi connectors are used. A good example is Atlas Copco Turbo grinders. The MAXI-B has a diecast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. Working temperature -10ºC to +50ºC at 10 bar NOTE: For dry compressed air, ice formation must be avoided. Operating pressure Inlet pressure 0-17.5 bar Outlet pressure 0.5-12 bar Standard filter 30 µm...

Optional Accessories Common accessories Ordering No. Designation MIDI OPTIMIZER Are included in combination units (FD, FTD, F/RD and FRD) Common accessories have to be ordered separately for separate units. Filter (FIL) accessories (30 µm filter element is included with all filters) Ordering No. MINI-K MIDI OPTIMIZER Bowl guard Regulator (REG) accessories Ordering No. Designation Pressure gauge 0-10 bar Ø 40 mm 9090 1907 00 Ø 50 mm Metal housing 0-16 bar Ø 49 mm Ø 50 mm MIDI OPTIMIZER Panel mounting pressure gauge 0-10 bar Ø 50 mm 0-16 bar Ø 63 mm Pressure gauge 0-10 bar is included in the...