Product Description
MPSC stainless steel pleated filters are designed for reliable and efficient filtration of steam, high-temperature, or corrosive gases and liquids. The pleated construction and large surface area provide high dust holding capacity and extended service life. The filters are fully welded without adhesives or glues.

Devices
MPSC filters are available in scalable cartridges suitable for both laboratory and production-scale applications. They use the same media and materials, facilitating easy scale-up without requalification.

Compatibility
Made entirely from stainless steel, MPSC filters offer wide compatibility with various fluids, including solvents, acids, and bases. They are suitable for pre-filtration in water and other liquids and comply with food production and pharmaceutical regulations.

Documentation
The filters are manufactured under an ISO 9001 certified Quality Management System. They comply with EU regulations for materials in contact with foodstuffs and meet CFR Title 21 requirements.

Key Features

• High flow and low pressure drop
• Absolute retention rate for gases
• Wide chemical compatibility
• Suitable for repeatable cleaning and regeneration by ultrasonic bath

Applications
MPSC filters are used in the Food & Beverage, Pharmaceutical, Cosmetics, and Chemical Industries for steam, gases, and liquids filtration, including culinary steam and high-temperature gas and water filtration.

Regulatory Compliance
The product complies with food contact regulations 21 CFR §177 - 182 and (EC) No 1935/2004.

Quality Assurance
An electronic Certificate of Conformity is available for each filter cartridge, detailing product approvals.

Product Purity
MPSC cartridges are free of surfactants, anti-static agents, binders, and adhesives.

Technical Data

• Micron ratings: 1/5/25 µm
• Cartridge length: 10”/20”/30” + UF sizes
• Cartridge diameter: 42mm - 140mm
• Material: Sintered 316L Stainless steel, End caps 304 Stainless steel
• Seal: EPDM, Fluoraz
• Max operating temperature: 210°C (EPDM), 250°C (Fluoraz)
• Max differential pressure: 5.0 bar
• Recommended changeout pressure: 2.5 bar

Product Configuration
Cartridges are available in various sizes and configurations, with specific dimensions and correction factors provided for each model.