*mydirectindustry

ASC

ASC

Product catalog summary

Product Description
ASC sintered carbon block filters are designed for extended service life in chlorine reduction from water, outperforming standard carbon block filters. The filters utilize a unique sintered block with low binder content, enhancing the active surface area. They are constructed with granular and powdered carbon, protected by an outer spun bonded PP pre-filter to maximize service life.

Devices
ASC filters are available in scalable high flow cartridges suitable for both laboratory and production scale, maintaining consistent media and materials across all sizes, facilitating easy scale-up without requalification.

Compatibility
The filters are made from multi-layer carbon impregnated felt media with a polyester substrate, offering broad chemical compatibility and minimizing microbiological contamination risks.

Documentation
Manufactured under an ISO 9001 certified Quality Management System, ASC filters comply with EU regulations for food contact materials, making them suitable for food and beverage applications. They also meet CFR Title 21 requirements.

Regulatory Compliance
The product complies with food contact regulations 21 CFR §177 - 182 and (EC) No 1935/2004.

Quality Assurance
Each filter cartridge comes with an electronic Certificate of Conformity, detailing product approvals and batch information. Manufacturing occurs in a controlled environment.

Product Purity
ASC series cartridges are free from surfactants, anti-static agents, binders, and adhesives.

Chlorine Reduction Capacity
Capable of reducing >112,500 liters of water with >96% reduction of 2ppm free chlorine at a flow rate of 3.7 l/min.

Maximum Flow Rate
15 l/min per 10” cartridge.

Key Features

Graded density pre-filtration layer
Reduced binder content for larger active carbon surface area
Sintered using GAC and powdered carbon

Applications
Suitable for Food & Beverage, Pharmaceutical, Cosmetics, and Chemical Industries, including ozone level reduction, plating bath organics reduction, and small-scale chlorine, odor, and TOC reduction.

Technical Data

Micron ratings: 5 µm
Cartridge lengths: 10”/20”/30”/40”
Cartridge diameter: 66.5mm
Material: Coconut-based carbon, PP melt blown outer
Core and End caps: Polypropylene
Seal options: Silicone, Viton, EPDM
Maximum operating temperature: 80°C
Maximum differential pressure: 4.0 bar @20°C
Recommended changeout differential pressure: 2.5 bar @20°C

Product Configuration
Cartridges are available in various configurations with different end caps and seals, exemplified by ASC 5µm 20” C7 S.

Catalog excerpts

sintered carbon block filters

Open the catalog to page 1

ASC sintered carbon block filters Product description ASC filters are designed, developed and manufactured in accordance with a ISO 9001 certified Quality Management System. Key features • Graded density pre-filtration layer • Reduced binder content for larger active carbon surface area • Sintered using GAC and powdered carbon Thanks to its chemical compatibility ASC series filters are widely used in Food & Beverage, Pharmaceutical, Cosmetics and Chemical Industries. Filter media Coconut based carbon, PP melt blown outer Silicone, Viton, EPDM Maximum operating temperature 80°C Maximum differential...

Open the catalog to page 2

Cartridges Series C8 (2x222 O-ring/fin) C28 (2x222 O-ring + 3 tabs/fin) DOE (flat + gasket/flat + gasket) Atlas Copco Process Filtration atlascopco.com 2935 0102 50 – EN © Atlas Copco, Washington, United Kingdom. March 2024

Open the catalog to page 3

All Atlas Copco Process Filtration catalogs and technical brochures

Archived catalogs

PWP/PWC/PWG
3 Pages