Introduction – Grinders Maximum material removal with minimum effort Atlas Copco Turbine Grinders give you twice the power with half the weight and are impossible to stall with the right installation! Atlas Copco´s range covers all, you can rely on maximum material removal with minimum effort. unhardened steel Soft material Softer materials Wood, brass Cast iron Plastics, Al. TC – Tungsten carbide tipped rotary burr. HSS – High speed steel burrs. For mounted points, follow the recommendations that relate to the particular mounted point. Rough grinding Pure material removal is determined by the...

Guides Sanding and polishing see page 212, 216 and 218 Die grinding and deburring see page 204 1 Carbide burrs Fibre discs Rough grinding and cutting off see page 201, 206, 210 and 214 3 Depressed center wheels Polishing bonnets 13 Radial flap wheels Diameter – peripheral speed – r/min The table below will help you to translate the peripheral speed of the grinding wheel to the correct rotational speed of the grinder when using a grinding wheel with a specific diameter. Grinding wheel dia mm Peripheral speed in meters per second 10

Product Safety This is your responsibility Always read and understand the safety information supplied with the tool and on www.atlascopco.com. All locally legislated safety rules regarding installation, operation and maintenance shall be respected at all times. 1. Check the free speed l The measured speed at a pressure of 6.3 bars must not exceed the rated speed, which is marked on the grinder. l Remove the grinding wheel and outer flange before checking the free speed. l Carry out checks daily. l Make sure the speed marking on the tool is legible. l Return the machine for repair in the event...

Turbine Grinder TURBINE TECHNOLOGY BOOSTS PRODUCTIVITY More efcient than a conventional vane grinder motor, the 2 stage turbine motor in the GTG25 provides an extremely high efficiency leading to great rate of material removal on the roughest surfaces. A speed governor ensures optimum process speed and process time is cut to a minimum. Since the job is done faster, the total energy consumption is signicantly lower for each job. REDUCES OPERATOR STRAIN The GTG25 is ergonomically designed in every aspect. Its high power-to-weight ratio, 2.5 kW of power in a 2.1 kg tool, makes grinding much easier...

Turbine Grinders and Sanders The GTG/GTR40 are the most powerful grinders in the turbine grinder range, with incredible power for their size and weight. The range includes angle and straight type grinders for virtually every common rough grinding application. l GTG40 F – for rough grinding and cutting off with depressed center wheels. l GTG40 S – for surface fi nishing with fibre discs and wire brushes. l GTG40 C – for rough grinding with cup wheels. l GTR40 – for rough grinding and applications such as internal and external cleaning of castings with straight grinding wheels. l Dust extraction...

Turbine Grinders and Sanders Adjustable wheel guard Support handle Attachments flanges for 1.5-7 mm thick cut-off wheels and 2.5-8 mm thick depressed center wheels Whip hose 0.7 m long, 16 mm dia complete with nipple and ErgoNIP 10 Gearbox oil, one tube Hex key for wheel change Wheel guard Attachments flanges for grinding wheels 20-25 mm thick and with hole Ø 25 mm Whip hose 0.7 m long, 16 mm dia complete with nipple and ErgoNIP 10 Gearbox oil, one tube Key and spanner for wheel change Heavy duty backing pad for sanding Ø 180 mm (7") Ø 230 mm (9") Hand shield Adapter for positioning support handle...

LSF07 is a high speed model for precision grinding and polishing. LSF07 is delivered with a 3 mm collet and can be equipped with a 1/8" collet as optional. (Without speed governor) LSF12/LSV12 – Small and comfortable die grinder with up to 360 W for maximum control in cramped spaces. All models are delivered with speed governor and a well balanced 6 mm Erickson collet. LSF19/LSV19 – All models in the 19 series are equipped with a powerful 0.5 kW air motor and a speed governor. The angled models (LSV) have a patented solution that overcomes temperature and leakage problems commonly associated...

Max free speed r/min Tungsten Mountcarbide ed burrs points mm mm High speed pen model LSF07 S850 b Weight Length max output free speed kg lb mm l/s cfm l/s cfm Air Rec. inlet hose size thread Collet mm in BSP size R = Model is rigid, without scatter damping Air hose, ErgoNIP 08, Collet 3 mm (See ill 1.) Spanner, Collet 6 mm (See ill. 1), Air hose, Air hose nipple and clamp, Exhaust hose Spanner, Collet 6 mm (See ill 1.), Air hose, Air hose nipple and clamp, Exhaust hose Air hose nipple, Collet 6 mm (See ill 1.) Only for rigid (-R) models Optional collets Collet 1/8" 4150 1822 00 Collet 3 mm Collet...

Straight Grinders For Cone Wheels and Collet Atlas Copco straight grinders for cone wheel or collet, are suitable for grinding in holes and cavities in castings. They require rough abrasives, which must be attached to the tool with a rigid shank or to be mounted directly to the spindle. The power ranges from 0.7 kW to 2 kW. All Atlas Copco tools are designed with focus on operator ergonomics and maximum power, the best combination for maximum productivity. l The LSR28 and 38 are suitable for lighter applications where accessibility is first priority. l LSR43 has a proven and rigid design, and...

1a For Cone Wheels and Collet Optional Accessories NOTE: Adapters are not included with the tool, and need to be ordered to attach a cone wheel. Productivity Kits Model MIDI Optimizer F/RD EQ10-R13-W, incl. whiphose MIDI Optimizer F/RD EQ10-R13-W, incl. whiphose MIDI Optimizer F/RD EQ10-T13 MIDI Optimizer F/R EQ10-T13 MIDI Optimizer F/RD EQ10-T13 MIDI Optimizer F/RD EQ10-T16 Rubair 13 mm Rubair 13 mm Turbo 13 mm Turbo 13 mm Turbo 13 mm Turbo 16 mm ErgoQIC 10 ErgoQIC 10 ErgoQIC 10 ErgoQIC 10 ErgoQIC 10 ErgoQIC 10 Service Kits 28 series 38 series 43 series 48 series