Catalogs >
ATLAS Copco Compressors USA >
Brochure CD 1-22+

Brochure CD 1-22+
2Pages

Catalog excerpts

Atlas Copeo Heatless Adsorption Compressed Air Dryers Q High-quality components provide fail-safe operation. Designed for low pressure drop and increased reliability Q As standard, filled with high-performance molecular sieves, allowing use for the various pressure dewpoints required (-40°C and -70°C). Overfilled cartridges protect against desiccant ageing and overflow peaks. Integrated after-filters ensure fast and clean maintenance Q Multi-port inlet and outlet ensure easy connection to air system. The dryer can be installed vertically or horizontally Q Integrated silencers ensure extremely low noise Q Full electronic controller with purge saver function. Sophisticated eléctrica panel IP65 protected against water and dust Enduring Performance ► Designed, built and tested to meet the toughest conditions in the compressor room and at point-of-use applications ► Non-return valves and purge orifices are built into the polycarbonate cartridges. The extrusions are made from aluminium to prevent corrosion ► Each desiccant cartridge includes an integrated after-filter, which saves space, simplifies installation and decreases the chance of leaks through fittings and connections. Working pressures up to 16 bar(g) and ► The sophisticated controller enables complete annunciation of the dryer and cycle status and automatic fault diagnosis, including alarms ► No need to disconnect the dryer from the compressed air network ► The inlet and outlet can be reversed and the dryer can be operated remotely Energy Saving & Cost Efficient ► Low pressure drop across the whole range ► Purge Saver function included as standard ► Adjustable purge to tune down the purge air consumption according to the actual working conditions (option) /tilas Copeo

Open the catalog to page 1

Technical Specifications Reference conditions: Compressed air inlet temperature: 35°C/95°F Compressed air inlet pressure: 7 bar(g)/102 psi(g) Inlet relative humidity: 100% To adjust the performance of each dryer for different inlet conditions, use the correction factors below: Pressure Dewpoint Correction (Kd): Inlet temperature correction factor (Kt): Inlet pressure correction factor (Kp): What is the capacity of a CD 7*, working at 8 bar(g)/116 psi(g), with an inlet temperature of 40°C/104°F and with a required pressure dew point of -70°C/-100°F? Find each correction factor: Kd=OJ Actual...

Open the catalog to page 2