*mydirectindustry

Catalogs
ATLANTIC FLUID TECH SRL
CARTRIDGES CATALOGUE

CARTRIDGES CATALOGUE

Product catalog summary

Technical Specifications Overview: The document outlines specifications for hydraulic components, solenoid-operated cartridge valves, and coil series. It includes details on pressure reducing and relieving valves, check valves, pilot-operated check valves, and solenoid-operated cartridge valves, focusing on dimensions, operating pressures, flow rates, and installation requirements.

Pressure Reducing and Relieving Valves:

Specifications: Standard setting at 5000 psi with adjustable ranges. Flow rates are 140 l/min and 60 l/min. Installation torque varies by model size.
Options: Adjustment methods include screw and handknob.

Check Valves:

Specifications: Cracking pressures range from 0.35 to 20 bar. Flow rates vary from 10 to 120 l/min.
Types: Includes poppet and disk types, with monodirectional and bidirectional options.

Pilot Operated Check Valves:

Specifications: Max pressure of 350 bar with pilot ratios of 3:1. Rated flow of 30 l/min.
Features: Integral pilot piston with O-ring options.

Solenoid-Operated Cartridge Valves:

Specifications: Max operating pressure of 350 bar, with options up to 500 bar. Rated flow varies by model.
Ordering Codes: Unique codes for each model, with options for overrides and pressure ratings.

Coil Series M12 and M16:

Specifications: Available in various voltages with Class H insulation. Power and current specifications vary.
Protection: IP65, IP67, and IP69 protection classes.

General Technical Specifications:

Materials: High-grade steel and aluminum with zinc plating.
Seals: Standard seals are NBR, with Viton available on request.
Fluids: Recommended mineral oil-based fluids with specific viscosity and temperature ranges.

Environmental Care and Disposal: Products are recyclable, and disposal of hydraulic fluids must comply with local laws.

MTTFd Certificate: Products adhere to UNI ISO 13849-2:2012 standards, with a presumed MTTFd value of 150 years.

General Terms of Supply:

Orders: Must be in writing and confirmed within 10 days.
Warranty: 24-month warranty covering defects, excluding seals and O-rings.
Use Restrictions: Products not for unauthorized applications.

Catalog excerpts

CARTRIDGES CATALOGUE INDEX SECTION Relief Valves Pressure Reducing Valves Check Valves Pilot Operated Check Valves Shuttle and Logic Elements Flow Dividers and Combiners Flow Control Valves Solenoid Cartridges Proportional Cartridges Standard Manifolds Cavities and Technical Drawings Technical Specifications General Terms of Supply - Outline Agreement

Open the catalog to page 2

Fluid Tech

Open the catalog to page 3

RELIEF VALVES ATLANTIC Fluid Tech Hydraulic scheme Valve description Valve type Direct acting, poppet type Direct acting, poppet type Direct acting, poppet type Direct acting, poppet type Rated Max. flow pressure l/min (gpm) bar (psi) Installation Main p.ort. size or cavity type Page Cartridge Direct acting, with filter, compensated 1,5 (0,4) 460 (6700) Direct acting, poppet type, compensated 30 (8) 420 (6000) Direct acting, poppet type, chamber vented 80 (21) 350 (5000) Direct acting, poppet type 90 (24) 380 (5400) Pilot operated, spool type 120 (32) 350 (5000) Pilot operated, spool type 300...

Open the catalog to page 4

RELIEF VALVE DIRECT ACTING WITH FILTER Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: MTTFd: 150 - 1200 years: See technical spec. NOTES For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES Quick code CP000015 CP000002 CP000029 Standard setting (cracking pressure) Pressure increase

Open the catalog to page 5

RELIEF VALVE CPLN-020-DPNA DIRECT ACTING STABILIZED PISTON ATLANTIC Fluid Tech Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory Ordering code: ORDERING CODES

Open the catalog to page 6

RELIEF VALVE ATLANTIC Fluid Tech Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 7

RELIEF VALVE CPLN-XXX-DHNA DIRECT ACTING STABILIZED PISTON HARDENED SEAT ATLANTIC Fluid Tech With Filter Without filter Contamination class to ISO 4406: See technical spec. Seal kit: RC700008 Installation torque: 40 - 45 Nm (2? - 33 ft-lb) MTTFd: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory Ordering code: ORDERING CODES

Open the catalog to page 8

ORDERING CODES

Open the catalog to page 9

RELIEF VALVE CPLT-005-DPNA DIRECT ACTING WITH FILTER COMPENSATED ATLANTIC Fluid Tech Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: 27 - 33 Nm (20 - 24 ft-lb) MTTFd: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 10

RELIEF VALVE CPLT-030-DHNA DIRECT ACTING COMPENSATED STABILIZED PISTON HARDENED SEAT ATLANTIC Fluid Tech With filter Without filter Max. operating pressure: Max. operating pressure on T: Rated flow: Cavity: Contamination class to ISO 4406:See technical spec. Seal kit: RC700008 Installation torque: 45 - 50 Nm (33 - 37 ft-lb) MTTFd: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 11

RELIEF VALVE CPLV-080-DHNA DIRECT ACTING STABILIZED PISTON CHAMBER VENTED ATLANTIC Fluid Tech Rated flow: Max. operating pressure: 80 l/min (21 gpm) Contamination class to ISO 4406: See technical spec. Seal kit: RB100089 Installation torque: 118 - 132 Nm (87 - 97 ft-lb) MTTFd: 150 - 1200 years: See technical spec. (*) The cartridge exceed overall dimension of the standard cavity into port 1. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 12

RELIEF VALVE DIFFERENTIAL AREA POPPET TYPE Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: 150 - 1200 years: See technical spec. NOTES For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES Quick code Standard setting (cracking pressure) Adjustment range Pressure increase

Open the catalog to page 13

RELIEF VALVE CPLN-090-DHGA DIRECT ACTING STABILIZED PISTON ATLANTIC Fluid Tech Rated flow: Cavity: Contamination class to ISO 4406: See technical spec. Seal kit: RC900249 Installation torque: 45 - 50 Nm (33 - 37 ft-lb) 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 14

RELIEF VALVE PILOT OPERATED SPOOL TYPE ATLANTIC Fluid Tech Rated flow: Cavity: Contamination class to ISO 4406: See technical spec. Seal kit: RB700082 Installation torque: 55 - 62 Nm (40 - 46 ft-lb) MTTFd: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 15

RELIEF VALVE PILOT OPERATED SPOOL TYPE Hex. 5 [0,2] SPECIFICATIONS Max. operating pressure: Rated flow: Cavity: Contamination class to ISO 4406: See technical spec. Installation torque: 150 - 1200 years: See technical spec. 350 cm³/min @200 bar 21,4 in³/min @2800 psi NOTES For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES Quick code CP000188 CP000177 CP000178 Standard setting Adjustment range Pressure increase (cracking pressure)

Open the catalog to page 16

RELIEF VALVE PILOTED OPERATED SPOOL TYPE ATLANTIC Fluid Tech Rated flow: Contamination class to ISO 4406: See technical spec. Installation torque: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 17

RELIEF VALVE CPLT-120-PSNA PILOT OPERATED SPOOL TYPE COMPENSATED Rated flow: Cavity: Contamination class to ISO 4406: See technical spec. Installation torque: 55 - 62 Nm (42 - 46 ft-lb) MTTFd: 150 - 1200 years: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory ORDERING CODES

Open the catalog to page 18

RELIEF VALVE PILOT OPERATED SPOOL TYPE SEPARATE TANK LINE Max. operating pressure: Rated flow: Seal kit: Installation torque: 150 - 1200 years: See technical spec. 200 cm³/min @ 200 bar 12,2 in³/min @ 2800 psi Contamination class to ISO 4406: See technical spec. For other configurations/quick codes not available in this catalogue page please consult factory Adjustment with Screw Adjustment with Handknob ORDERING CODES Quick code Standard setting Adjustment range Pressure increase (1700 psi/turn) (1000 psi/turn) (550 psi/turn) (1700 psi/turn) (1000 psi/turn) (550 psi/turn) Option Adjustment with...

Open the catalog to page 19

All ATLANTIC FLUID TECH SRL catalogs and technical brochures

IN LINE VALVES CATALOGUE
13 Pages