47 Series - BR Soft DIN 9 Racks

Product catalog summary

Overview: This document provides detailed specifications for various rack modules, including dimensions, materials, and quality standards. It includes both racks with and without mounting holes.

Specifications:

Dimensions: The document lists dimensions in millimeters for different rack modules, ranging from module 1.5 to 10. Key dimensions include length, width, height, and other critical measurements.
Materials: All racks are made from C45 bright steel, ensuring durability and strength.
Quality: The racks feature milled teeth, and the total pitch error is specified as GTf /1000 ≤ 0.150 mm, indicating high precision.

Procedures and Recommendations:

Racks should be used for continuous linking only with the left side, as indicated in the accompanying sketch.
For mounting racks, additional information is available on page ZF-2.
Further details can be found on page ZA – 10.

Data Summary: The document includes a comprehensive table of dimensions for each rack module, specifying parameters such as module number, length, width, height, and weight. It distinguishes between racks with and without mounting holes, providing specific measurements for each type.

Catalog excerpts

cfmnNmj BR Racks Module 1.5 - 10 Quality 9 Order N° N° Code Module L1 L2 of Teeth b hk h0 f a I of Holes h d-i d2 t a1 47 11 100 10 1000.00 35.5 30 100 99 89 without Mounting Holes 69.80 1) These racks should be used for continuous linking only with the left side (see sketch). Total pitch error GTf /1000 < 0.150 mm. • Milled teeth • Material C45 • Bright Steel Mounting racks, see page ZF-2. Further information see page ZA - 10.

Open the catalog to page 1

All Atlanta Drive Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list