Overview

This document provides technical specifications for small size forged valves, specifically focusing on API Y-Type Strainers. It includes dimensional data and weight information for various nominal pipe sizes (NPS) and pressure classes.

Specifications

• Valve Type: API Y-Type Strainer
• Nominal Pipe Sizes (NPS): Ranges from 2 to 14 inches
• Pressure Classes: 150 lb, 300 lb, and 600 lb

Dimensions and Weights

The document lists dimensions (likely height, length, width) and weights for each NPS and pressure class. Although the exact units and parameters are partially unclear due to formatting, the data indicates increasing dimensions and weights with higher NPS and pressure ratings.

• 150 lb Class: Dimensions and weights increase progressively from NPS 2 to 14, with heights ranging approximately from 205 to 640 units and weights from 230 to 838 units.
• 300 lb Class: Dimensions and weights are higher than 150 lb class, with heights from approximately 235 to 690 units and weights from 292 to 899 units.
• 600 lb Class: Further increased dimensions and weights, with heights from approximately 255 to 650 units and weights up to 880 units.

Manufacturer Information

The valves are manufactured by Athena Engineering S.R.L. More information can be found on their website: www.athenavalve.com.

Critical Notes

• The document appears to be a technical data sheet intended for engineers and procurement specialists requiring detailed valve sizing and weight data.
• Exact measurement units and some dimension labels are not fully clear due to formatting issues; users should verify with the manufacturer for precise engineering data.
• The data supports selection of appropriate valve sizes and pressure ratings for industrial applications.