CABLE GLANDS & ACCESSORIES Trademark for Innovation & Quality

Our Company Bimed begun in 1978 as a manufacturer of medical and mechanical components. Today Bimed is a family owned organization with more than 300 people and a 20,000 square meter facility. The Istanbul, Turkey-based company has offices in North America, Germany and Egypt. In many other countries Bimed is represented through local distribution partners. Our product range consists of the following groups: Cable glands and conduit fittings Pressure balance elements Connectors for the appliance and automotive industries Gas springs for the automotive and furniture industries Disposable medical...

Content Certificate and Group 4 Function Glands 4 Function Glands Gas & Dust - Group II-III Ex II GD Ex d IIC Gb Ex e IIC Gb Ex tb III Db Dorado BA L-Dorado BA-L Orion KBA Octans BU 4 Function Glands 4 Function Glands 4 Function Glands 1 Function Glands Gas & Dust - Group II-III Ex II GD Ex d IIC Gb Ex e IIC Gb Ex tb III Db Orion KBA Orion Universal KBAU Orion Offshore KBAO 4 Function Glands 4 Function Glands 4 Function Glands Crater E-Octans E-Vela Norma 1 Function Glands 1 Function Glands 1 Function Glands 1 Function Glands E-Carina E-Cygnus Phoenix Rigid Conduit Fittings Rigid Conduit Fittings...

MINING applications The first hazardous area was discovered in the early coal mines* This area held a double hazards melhane gas (firedamp] ond coal dust. Methane gas is absorbed in the pores of coaL When the coal is mined the methane is evolved, a process fiat takes a relatively short time. To be completely free of methane, coal has to be store for a period of up to When miners worked an 8-hour shift pattern, the mined coal woufd be left in the shaft until the next day. during which time the melhane would start to be evolved inlo the air in the shaft. The methane would collect in packets al...

Dorado 4 Function Ex d/e Gland Approved by Examination Certificate Number Date of Issue Test Report Number Safety Requirements Equipment Marking Approved Equipment Item Description O-ring Lower body Lower seal O-ring Grounding cone O-ring O-ring Swivel retainer Upper body Washer Upper seal Pressure Cap Armored wire Armored Cable GOST"R" Mining Group ZONE1/ZONE2 No need to change, to remove or to adjust any internal components as long as the diameter of the used cable is within the declared clamping range. The swiveling “shielding cone” (5) for clamping armor is secured to the “upper body” (9)...

Dorado 4 Function Ex d/e Gland Suitable for use in For Degree of Protection Marking Deluge Proof Option Cable Type Seal Operating Nbr Temperature Chloroprene Silicone Material Thread Type Group I Mining IM2 Mining potentially explosive atmospheres IP66 – IP68 (EN 60529) BMD M-BA.. Ex CE 0722 I M2 Ex-d I Mb / Ex-e I Mb Ta-30°C +120°C IP66/68 IMQ 10 ATEX 036 Standard Steel wire armor -30°C / +120°C -40°C / +100°C Items 1-3-4-6-7-11 -60°C / +180°C Brass Items 2-5-8-9-12 Stainless Steel Metric (M) ISO Pitch 1,5 Npt (N) ANSI ASME B1.20.1 Other thread types also available upon request. Order Encoding...

Orion 4 Function Ex d/e Gland Approved by Examination Certificate Number Date of Issue Test Report Number Safety Requirements Equipment Marking Approved Item Description O-ring Lower body Lower seal O-ring Grounding cone Swivel retainer O-ring Upper body Upper seal Pressure Cap Armored wire Armored cable IMQ IMQ 11 ATEX 037 16.01.2012 43AL00047 EN 60079-0:2009 EN 60079-1:2007 EN 60079-7:2007 EN 60079-11:2010 EN 60079-31:2009 Ex-d I Mb Ex I M2 Ex-e I Mb GOST"R" - INMETRO ATEX Group I / Mining / Ex I M2 / Ex d I Mb - Ex e I Mb

Orion 4 Function Ex d/e Gland Equipment Suitable for use in For Degree of Protection Marking Cable Type Seal Operating Temperature Material Thread Type Mining Group ZONE1/ZONE2 Group I Mining IM2 Mining potentially explosive atmospheres IP66 – IP68 (EN 60529) BMD M-KBA.. Ex CE 0722 I M2 Ex-d I Mb / Ex-e I Mb Ta-40°C +100°C IP66/68 IMQ 11 ATEX 037 Steel wire armor -40°C / +100°C Items 1-3-4-7-9 -60°C / +180°C -30°C / +120°C Brass Items 2-5-6-8-10 Stainless Steel Metric (M) ISO Pitch 1,5 Npt (N) ANSI ASME B1.20.1 Other thread types also available upon request. Order Encoding Type Thread M-KBA01...

Groups II & III are further sub-divided depending upon the hazard.Group II gases are grouped together based upon the amount of energyrequired to ignite the most explosive mixture of the gas with air. Group III dusts are subdivided according to the nature of the explosive atmosphere for which it is intended. The equipment that may cause an explosion is contained within an enclosure which can withstand the force of an explosion and prevent transmission to the outside hazardous atmosphere. This method of protection also prevents the hazardous atmosphere from entering the enclosure and coming into...

fiGROUP ll-lll

Dorado 4 Function Ex d/e Gland Approved by Examination Certificate Number Date of Issue Test Report Number Safety Requirements Equipment Marking Ex II 2 GD Approved Item Description O-ring Lower body Lower seal O-ring Grounding cone O-ring O-ring Swivel retainer Upper body Washer Upper seal Pressure Cap Armored wire Armored Cable No need to change, to remove or to adjust any internal components as long as the diameter of the used cable is within the declared clamping range. The swiveling “shielding cone” (5) for clamping armor is secured to the “upper body” (9) and “lower body” (2) by orings...

Dorado 4 Function Ex d/e Gland Equipment Suitable for use in For Degree of Protection Marking Deluge Proof Option Cable Type Seal Nbr Operating Chloroprene Temperature Silicone Material Thread Type Gas Group Dust Group ZONE1/ZONE2 ZONE21/ZONE 22 Group II Group III Gas Group IIC Dust Group IIIC Gas & Dust potentially explosive atmospheres IP66 – IP68 (EN 60529) BMD BA.. Ex CE 0722 II 2GD Exd IIC GB / Exe IIC Gb / Ex tb IIIC Db Ta-30°C +120°C IP66/68 IMQ 10 ATEX 036 Standard Steel wire armor -30°C / +120°C Items 1-3-4-6-7-11 -40°C / +100°C -60°C / +180°C Brass Items 2-5-8-9-12 Stainless Steel Metric...