Data sheet ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.05.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein.

TeS / SeS Z50 Technical data Type Accuracy class Torque measuring system Rated torque short measurement range (optional, minimum) (Mdns) #2 Accuracy class extended (for Mdn) Outputs Test signal Frequency (RS422), Voltage, Current, CAN bus, Alert see test report Mechanical dimensions Outer diameter of rotor #4 Lengths (Rotor, without centering) Pitch circle diameter #5 Speeds and speed measuring systems Speed detection (integrated) Speed detection (optional) Maximum Speed without speed detection system Optional increased speed Maximum speed with magnetic speed encoder Maximum speed with optical...

Technical data Type Accuracy class Voltage output Current output Linearity deviation including hysteresis related to Mdn #6 Rel. standard deviation of the reproducibility according to DIN 1319, by reference to variation of the output signal (rel. to Mdn) Frequency output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the output signal related to the actual value of signal span (rel. to Mdn) Frequency output Voltage output Current output Temperature influence per 10K in the nominal temperature range on the zero signal (rel. to Md n) Frequency output...

TeS / SeS Z50 Technical data Type Accuracy class Nominal sensitivity (range between zero torque and rated torque) Output signal at zero torque Nominal output signal Frequency output at positive nominal value kHz Frequency output at negative nominal value kHz Voltage output at positive nominal value V Voltage output at negative nominal value V Current output at positive nominal value mA Current output at negative nominal value mA Group delay time (main TCU) ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.05.2024. The information contained in the product data sheet corresponds...

TeS / SeS Z50 Technical data Type Accuracy class Speed measuring system Inductive (track at rotor) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Speed measuring system Magneto resistive (2 tracks approx. 90 degree phase shifted) Maximum speeds (related to PPR) rpm N/A Minimum speed for sufficient pulse stability rpm N/A Nominal clearance (sensor - pole ring) mm N/A Working airgap (sensor - pole ring) mm N/A Nominal axial displacement (rotor - stator) #7 mm N/A Tolerance to nominal axial displacement (rotor - stator) mm N/A Speed measuring system...

TeS / SeS Z50 Technical data Type Accuracy class Angular measuring system ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.05.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves the right to make changes to the technical data. ATESTEO does not accept any liability for consequential losses arising from the use of this product data sheet or the information contained therein. 6

TeS / SeS Z50 Technical data Type Accuracy class Temperature ranges Nominal temperature range (Rotor) °C 0...80 Operating temperature range (Rotor)#8 °C -20...85 Storage temperature range (Rotor) °C -30...85 Nominal temperature range (Stator) °C 0...80 Operating temperature range (Stator) #9 °C -20...85 Storage temperature range (Stator) °C -30...85 Nominal temperature range (TCU) °C 0...70 Operating temperature range (TCU) °C -20...70 Storage temperature range (TCU) °C -30...85 Load limits Limit torque, related to Mdn Breaking torque approx., related to Mdn Axial limit force Lateral limit force...

TeS / SeS Z50 Technical data Type Accuracy class Mechanical values Torsional stiffness Axial stiffness Radial stiffness Bending stiffness Deflection at axial limit force Additional radial deviation at lateral limit force Parallel deviation at bending limit torque Inherent frequency Max. limits for relative shaft vibration (peak to peak) #11 ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.05.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created. ATESTEO continually further develops its products and reserves...

Technical data Accuracy class Weight approx. Stator (without speed encoder) #12 Mounting distances (without optional speed detection system) Nominal radial displacement (rotor - stator) Tolerance to nominal radial displacement (rotor - stator) Nominal axial displacement (rotor - stator) Tolerance to nominal axial displacement (rotor - stator) Flatness and concentricity tolerances rotor Circular run-out-axial tolerance #13 Circular run-out-radial tolerance #13 Power supply Nominal supply Supply range #14 Max. current consumption in measuring mode Max. current consumption in start-up mode Nominal...

TeS / SeS Z50 Technical data Type Accuracy class Protection class (rotor) Protection class (stator) Protection class (rotor, extended) Protection class (stator, extended) Pitch circle screw information Configuration interface Central hole Material Measuring range (related to Mdn) Compatible evaluation units (TCU) Stator type - Titanium Titanium Sales information Article number U.S. FCC certificate ©2024, ATESTEO GmbH & Co. KG, This product data sheet was created on 03.05.2024. The information contained in the product data sheet corresponds to the status quo at the time the document was created....

TeS / SeS Z50 Remarks and information Link no. Topic #2 Second torque range #5 Pitch circle diameter #8 Temperature range (rotor) #9 Temperature range (stator) Based on customer requests, the measurement systems can optionally be optimized for not listed nominal torque values (intermediate ranges possible). The written second nominal torque value (Mdns) is the smallest possible. Greater second torque ranges can be chosen on demand. Mechanical values and load limits vary between single and dual range torque meters. A data sheet for dual range torque meters with specific values can be requested....